1. Manuals
  2. Brands
  3. Lex System Manuals
  4. Motherboard
  5. 3I610DW
  6. User manual

Lex System 3I610DW User Manual

Intel skylake-u/kaby lake-u core i cpu, ddr4 2133 mt/s sodimm, 5 x lan/hdmi/usb/com/pcie mini card all-in-one intel skylake-u/kaby lake-u core i cpu, 5 x intel gbe lan, 2 x pcie mini card slots, 2 x hdmi, edp, 4 x usb 3.0, 3 x usb 2.0, 2 x com, wide range
Hide thumbs
Table of Contents

Advertisement

Quick Links

3I610DW
Intel Skylake-U / Kaby Lake-U Core i CPU,
DDR4 2133 MT/s SODIMM, 5 x LAN / HDMI / USB /
COM / PCIe mini card
All-In-One
Intel Skylake-U / Kaby Lake-U Core i CPU,
5 x Intel GbE LAN, 2 x PCIe mini card slots, 2 x HDMI, eDP,
4 x USB 3.0, 3 x USB 2.0, 2 x COM, Wide Range DC-IN
NO. 3I610DW
Release date: JULY. 23. 2018

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 3I610DW and is the answer not in the manual?

Questions and answers

Summary of Contents for Lex System 3I610DW

  • Page 1 Intel Skylake-U / Kaby Lake-U Core i CPU, 5 x Intel GbE LAN, 2 x PCIe mini card slots, 2 x HDMI, eDP, 4 x USB 3.0, 3 x USB 2.0, 2 x COM, Wide Range DC-IN NO. 3I610DW Release date: JULY. 23. 2018...

  • Page 2: Table Of Contents

    1-5 PACKING LIST ........................CHAPTER 2 HARDWARE INSTALLATION ................2-1 UNPACKING PRECAUTION ....................2-2 UNPACKING CHECKUP ...................... 2-3 DIMENSION-3I610DW ......................2-4 LAYOUT-3I610DW-FUNCTION MAP-TOP ................2-4-1 LAYOUT-3I610DW-FUNCTION MAP-BOT ............... 2-5 FUNCTION MAP-3I610DW ....................2-6 CONNECTOR MAP-3I610DW-TOP ..................2-6-1 CONNECTOR MAP-3I610DW-BOT ..................
  • Page 3 3-9 USB INTERFACE ......................... 3-10 CL1/2/3/4/5: RJ45 LAN1/2/3/4/5 CONNECTOR ..............3-11 CO1: 1 C BUS 4PIN (1.25mm) WAFER) ................3-12 COH1: +12V HEATER (1x2 PIN 2.0mm WAFER) .............. 3-13 CPI1: DC POWER INPUT (2x4 PIN 2.0mm WAFER) (RED) ..........3-14 CPO1: +12V/+5V DC VOLTAGE OUTPUT WAFER CONNECTOR (BLACK) ....3-15 EDP1: EDP INTERFACE (2x10 PIN 1.25mm WAFER) ............
  • Page 4 5-2 VGA INSTALL INTEL SKYLAKE & KABY LAKE VGA Driver ..........5-3 HD AUDIO INSTALL HIGH DEFINITION AUDIO DRIVER ........... 5-4 ME TOOL INSTALL INTEL USB 3.0 ME DRIVER ..............5-5 LAN INSTALL LAN DRIVER (EXAMPLE FOR WIN10 64bit) ..........5-6 ITEMS FOR WINDOWS 7 INSTALLATION ................
  • Page 5 Copyright This manual is copyrighted and all rights are reserved. It does not allow any non authorization in copied, photocopied, translated or reproduced to any electronic or machine readable form in whole or in part without prior written consent from the manufacturer.

  • Page 6: Warning

    Warning ! 1. Battery Batteries on board are consumables. The life time of them are not guaranteed. 2. Fless solution with HDD The specifi cation & limitation of HDD should be considered carefully when the fanless solution is implemented. We will not give further notifi cation in case of changes of product information and manual.

  • Page 7: Hardware Notice Guide

    Hardware Notice Guide 1. Before linking power supply with the motherboard, please attach DC-in adapter to the motherboard fi rst. Then plug the adapter power to AC outlet. Always shut down the computer normally before you move the system unit or remove the power supply from the motherboard.
  • Page 8 Photo 1 Insert Unplug...

  • Page 9: Chapter 1 General Information

    Chapter-1 General Information The 3I610DW is a 3.5" (146 x 102 mm) motherboard with wide range 9~36V DC power input & fantastic flexibility and integration with optional eIO (PCIe + USB) expansion Function: 3I610DW is based on the Intel® Skylake-U i7 / i5 / i3 / Celeron processor,...

  • Page 10: Major Feature

    1-1 Major Feature 1. Intel® Celeron 3955U Processor 2.0GHz, (Dual core), Intel® Core i5-6200U Processor 2.3GHz / 2.8GHz (Dual core), Intel® Core i7-6600U Processor 2.6GHz / 3.4GHz (Dual core) 2. Intel 9th generation (Gen 9) LP graphics and media encode / decode engine, Intel®...

  • Page 11: Specification

    1-2 Specifi cation SOC: Intel® Celeron 3955U Processor 2.0GHz, (Dual core), Intel® Core i5-6200U Processor 2.3GHz / 2.8GHz (Dual core), Intel® Core i7-6600U Processor 2.6GHz / 3.4GHz (Dual core) Memory: DDR4 SODIMM slot x 2, up to 32GB Graphics: Intel 9th generation (Gen 9) LP graphics and media encode / decode engine, Intel®...

  • Page 12: Installing The So-Dimm

    1-3 Installing the SO-DIMM 1. Insert the memory into the SODIMM slot diagonally. 2. Press the memory into the SODIMM slot.

  • Page 13: Removing The So-Dimm

    1-3-1 Removing the SO-DIMM 1. Pull down two sides of fi xed fl at- springs out of the memory...

  • Page 14: Installing The Mini Pci-E Card (Full Size)

    1-4 Installing the Mini PCI-e Card (Full Size) 1. Unscrew the screw on the board 2. Plug in the Mini Card in a 45 angle 3. Gently push down the Mini Card and screw the screw back.

  • Page 15: Packing List

    1-5 Packing List Material Code Description Detail Specifi cation Quantit 7G1901-1705001-0 MB-3I610DW-EC0-001 LF 6G6003-7350-0100 Power Cable LF, 2.0 2*4/DC JK,L=9cm 6G6001-2203-0100 SATA DATA Cable (Red) LF,L=25cm 6G6003-1009-0100 SATA Power Cable LF,L=25cm,1*4/2.0 to 180° SATA 15p 6G8006-2350-0100 DVD LF, Support Apollo Lake/Skylake ■60W Power...

  • Page 16: Chapter 2 Hardware Installation

    Chapter-2 Hardware Installation 2-1 Unpacking Precaution This chapter provides the information how to install the hardware of 3I610DW. 2-1 and 2-2 to check the delivery package and unpack carefully. Please follow the jumper setting procedure. NOTE! 1. Do not touch the board or any other sensitive components without all necessary anti-static protection.

  • Page 17: Unpacking Checkup

    2-2 Unpacking checkup First of all, please follow all necessary steps of section 2-1 to protect 3I610DW from electricity discharge. With reference to section 1-5 please check the delivery package again with following steps: 1. Unpack the 3I610DW board and keep all packing material, manual and driver disc etc, do not dispose ! 2.

  • Page 18: Dimension-3I610Dw

    2-3 Dimension-3I610DW...

  • Page 19: Layout-3I610Dw-Function Map-Top

    2-4 Layout-3I610DW-Function Map Audio, Line-in, SMBUS Line-out, Audio Amp Power switch Mic-in CMOS Battery Front Panel Clear CMOS Jumper PS2 KB/MS USB2.0 4DI/DO COM1/2 PIN9 Jimper COM2 PCIe/mSATA/ RJ45 Giga LAN PCIe/USB/SIM Auto detect USB +12V/+5V Output COM1 eDP Power Jumper...

  • Page 20: Layout-3I610Dw-Function Map-Bot

    2-4-1 Layout-3I610DW-Function Map NANO SIM USB3.0 TYPE A SATA2 SATA1...

  • Page 21: Function Map-3I610Dw

    2-5 Function Map-3I610DW Audio/Line-In/ Power Switch Line-Out/Mic-In Audio Amp CMOS Battery Front Panel PS2 KB/MS 4DI/4DO USB2.0 COM2 PCIe/mSATA/USB COM1 PCIe/USB with SIM +12V/+5V Output DDR4 SODIMM DDR4 SODIMM Support L2L001/ L2L002 / DC-IN L2L003 / L2L004 / L2M001 Wide Range +9V~36V...

  • Page 22: Connector Map-3I610Dw-Top

    2-6 Connector MAP-3I610DW CALR1 SWP1 CBT1 CFP1 JSB1 CKM1 CU8/CU9/CU10 CIO1 JVC2 PCIe/mSATA/ JVC1 PCIe/USB/SIM Auto detect USB CPO1 JVL1 HDMI2 HDMI1 CPI1 COH1 EIO1...

  • Page 23: Connector Map-3I610Dw-Bot

    2-6-1 Connector MAP-3I610DW SIM1 SATA2 SATA1...

  • Page 24: Diagram-3I610Dw-Top

    2-7 Diagram- 3I610DW CALR1 MPCE2 SWP1 CBT1 CFP1 JSB1 CKM1 CU8/CU9/CU10 CIO1 JVC2 JVC1 CPO1 MPCE1 JVL1 HDMI2 HDMI1 CPI1 COH1 EIO1...

  • Page 25: Diagram-3I610Dw-Bot

    2-7-1 Diagram- 3I610DW SIM1 SATA1 SATA2...

  • Page 26: List Of Jumpers

    2-8 List of Jumpers JSB1: CMOS DATA Clear JVL1: eDP panel power select JVC1/2: COM1/2 PIN9 RI / +12V / +5V Select 2-9 Jumper Setting Description A jumper is ON as a closed circuit with a plastic cap covering two pins. A jumper is OFF as an open circuit without the plastic cap.

  • Page 27: Jsb2: Coms Data Clear

    2-10 JSB1: CMOS DATA Clear A battery must be used to retain the motherboard confi guration in CMOS RAM. Close Pin1 and pin 2 of JSB2 to store the CMOS data. To clear the CMOS,follow the procedures below: 1. Turn off the system and unplug teh AC power 2.

  • Page 28: Jvl1: Edp Panel Power Select

    2-11 JVL1: eDP panel power select JVL1 DESCRIPTION *2-3 +3.3V JVL1 1 2 3 1 2 3 *+3.3V 2-12 JVC1/2: COM1/2 PIN9 RI / +12V / +5V Select JVC1/2 DESCRIPTION *1-2 COM port pin9 use RI signal COM port pin9 use +5V voltage COM port pin9 use +12V voltage JVC2 +12V...

  • Page 29: Chapter 3 Connection

    Chapter-3 Connection This chapter provides all necessary information of the peripheral's connections, switches and indicators. Always power off the board before you install the peripherals. 3-1 List of Connectors CBT1: COMS battery 1x2 pin (1.25mm)wafer CA1: Line-out/Line-in/Mic-in/SPDIF-out 2x5 pin (2.0mm) Wafer CALR1: Amplifi...

  • Page 30: Cmos Battery Connector

    SWP1: Power On-Off 1x2 pin Wafer MPCE1: Full size mini card port 1 sockets 52pin MPCE2: Full size mini card port 2 sockets 52pin 3-2 CMOS battery connector CBT1: CMOS Battery 1x2pin (1.25mm) Wafer PIN NO. DESCRIPTION PIN NO. DESCRIPTION Note: 1.

  • Page 31: Audio Interface

    3-3 Audio interface CA1: Line-out / Line-in / Mic-in 2x5 pin (2.0mm) Wafer PIN NO. DESCRIPTION PIN NO. DESCRIPTION Line-out-R MIC-IN Line-in-R Line-in-L Line-out-L MIC-IN pin1 CALR1: Amplifi er Line-out Right / Left channel 4pin (1.25mm) wafer PIN NO. DESCRIPTION Left+ Left- Right-...

  • Page 32: Cc1/2 Com1/2 2X5Pin (2.0Mm) Wafer

    3-4 CC1/2 COM1/2 2x5pin (2.0mm) wafer (RS232 Mode) PIN NO. DESCRIPTION PIN NO. DESCRIPTION (RS485 Mode) PIN NO. DESCRIPTION PIN NO. DESCRIPTION Data - Data + (RS422 Mode) PIN NO. DESCRIPTION PIN NO. DESCRIPTION TX - TX + RX + RX - Note: 1.

  • Page 33: Cfp1 Front Panel Connector 2X5Pin (2.0Mm) Wafer

    3-5 CFP1 Front Panel connector 2x5pin (2.0mm) wafer PIN NO. DESCRIPTION PIN NO. DESCRIPTION Power button pin Power button GND Reset pin Reset GND Power LED- Power LED+ HDD LED- HDD LED+ LAN LED- LAN LED+ CFP1 pin1...

  • Page 34: Cio1 Dio 0--3 (2X5Pin 2.0Mm Wafer)

    3-6 CIO1 DIO 0--3 (2x5pin 2.0mm wafer) PIN NO. DESCRIPTION PIN NO. DESCRIPTION DI-0 DO-3 DI-1 DO-2 DI-2 DO-1 DI-3 DO-0 Note: 1. DI pin default pull up 10KΩ to +5V 2. If use need isolate circuit to control external device 3.

  • Page 35: Io Device: F75111 Under Dos

    3-6-1 IO Device: F75111 under DOS The Sample code source you can download from Source fi le: F75111_Dos_Src.rar http://tprd.info/lexwiki/index.php/IO_Device:F75111_under_DOS Binary fi le: F75111_Dos_Bin.rar USERNAME & PASSWORD: sf How to use this Demo Application 1.Boot Ms-Dos Operating System 2.execute "75WDT.EXE" binary fi le 3.Input 1 to Enable WDT timer or input 0 to Disable it.
  • Page 36 Introduction How to use this Demo Application WriteI2CByte(I2CADDR, CONFIG, 0x03);//Set Watch Dog Timer function WriteI2CByte(I2CADDR, WDT_TIMER, timer);//Set Watch Dog Timer range from 0-255. WriteI2CByte(I2CADDR, WDT_TIMER_CTL, 0x73);//Enable Watch Dog Timer in second and pulse mode How to use this Demo Application WriteI2CByte(I2CADDR, WDT_TIMER_CTL, 0x00);...

  • Page 37: Io Device: F75111 Under Windows

    3-6-2 IO Device: F75111 under Windows The Sample code source you can download from Source fi le: F75111_DIO_Src_v2.8W(32bit).zip http://tprd.info/lexwiki/index.php/IO_Device:F75111 Binary fi le: F75111_DIO_Bin_v2.8W(32bit).zip USERNAME & PASSWORD: sf We do the demo test with a test tool which DIx connect to DOx with Relay.
  • Page 38 How to use this Demo Application one F75111 two F75111 Attention Please: You must be install vcredist_x86.exe when fi rst time you run the F75111_DIO.exe DEMO AP,The vcredist_x86.exe include all required DLL fi le. WARNING: win7 system architecture, use the system administrator to open DIO utility 1.
  • Page 39 p.s. f75111 send "F75111_SetWDTEnable(BYTE byteTimer)" including a parameter "timer", if there's no disable signal (F75111_SetWDTDisable()) to stop it before timer countdown to 0, System will reboot. if there's disable signal received, resent Enable WDT signal, for a loop to prevent from reboot F75111 Layout Picture Introduction Initial Internal F75111 port address (0x9c)
  • Page 40 Enable/Disable WDT Enable : F75111_SetWDTEnable (BYTE byteTimer) Disable: F75111_SetWDTDisable () PULSE mode Sample to setting GP33, 32, 31, 30 output 1mS low pulse signal. this->Write_Byte(F75111_INTERNAL_ADDR, GPIO3X_PULSE_CONTROL, 0x00); //This is setting low pulse output this->Write_Byte(F75111_INTERNAL_ADDR, GPIO3X_PULSE_WIDTH_CONTROL, 0x01); //This selects the pulse width to 1mS this->Write_Byte(F75111_INTERNAL_ADDR, GPIO3X_CONTROL_MODE, 0x0F);...
  • Page 41 Get Input value BYTE F75111::InterDigitalInput() BYTE byteGPIO1X = 0; BYTE byteGPIO3X = 0; BYTE byteData = 0; this->Read_Byte(F75111_INTERNAL_ADDR,GPIO1X_INPUT_DATA,&byteGPIO1X) ; // Get value from GPIO1X this->Read_Byte(F75111_INTERNAL_ADDR,GPIO3X_INPUT_DATA,&byteGPIO3X) ; // Get value from GPIO3X byteGPIO1X = byteGPIO1X & 0xF0; // Mask unuseful value byteGPIO3X = byteGPIO3X &...
  • Page 42 //-------------------------------------------------------------------------------------------------------- #defi ne GPIO1X_INPUT_DATA 0x12 // GPIO1X Input #defi ne GPIO3X_INPUT_DATA 0x42 // GPIO3X Input //-------------------------------------------------------------------------------------------------------- #defi ne GPIO2X_OUTPUT_DATA 0x21 // GPIO2X Output //-------------------------------------------------------------------------------------------------------- #defi ne GPIO1X_PULSE_CONTROL 0x13 // GPIO1x Level/Pulse Control Register // 0:Level Mode // 1:Pulse Mode #defi ne GPIO1X_PULSE_WIDTH_CONTROL 0x14 // GPIO1x Pulse Width Control Register #defi...

  • Page 43: Io Device: F75111 Vb6 Under Windows

    3-6-3 IO Device: F75111 VB6 under Windows The Sample code source you can download from Source fi le: 75111_VB_v1.2.rar http://tprd.info/lexwiki/index.php/IO_Device:F75111_VB6 Binary fi le: 75111_VB_Src1.2.rar USERNAME & PASSWORD: sf How to use this Demo Application ● A Function - Choose your motherboard model ●...
  • Page 44 F75111 Layout Picture SDK Function Introduction Function EnableWDT Function EnableWDT(timer As Integer) Call WriteI2CByte(&H3, &H3) Call WriteI2CByte(&H37, timer) Call WriteI2CByte(&H36, &H73) End Function Function DisableWDT Function DisableWDT() Call WriteI2CByte(&H36, &H0) End Function...
  • Page 45 Function SetDOValue Function SetDOValue(dovalue As Integer) Dim Data As Integer Dim Value As Integer Data = 0 Value = dovalue If (Value And &H1) <> 0 Then Data = Data + &H1 End If If (Value And &H2) <> 0 Then Data = Data + &H2 End If If (Value And &H4) <>...
  • Page 46 Function CheckDIValue Function CheckDIValue() Dim GPIO1X As Integer Dim GPIO3X As Integer Dim DI1Xhex As String Dim DI3Xhex As String Dim Data As Long Data = 0 Call ReadI2CByte(&H12, GPIO1X) Call ReadI2CByte(&H42, GPIO3X) GPIO1X = GPIO1X And &HF0 GPIO3X = GPIO3X And &HF If (GPIO1X And &H10) <>...

  • Page 47: Io Device: F75111 Under Linux

    3-6-4 IO Device: F75111 under linux The Sample code source you can download from Source fi le: F75111v2.4L_SRC.tar.gz http://tprd.info/lexwiki/index.php/IO_Device:F75111_under_linux Binary fi le: F75111v2.4L_BIN.tar.gz USERNAME & PASSWORD: sf How to compile source code 1. Compile source code with Code::Blocks download and install the Code::Block with command "apt-get install codeblocks" Open an exist project(F75111.cbp) in Code::Blocks, click the compile button ( add an option 'pkg-config --libs gtk+-2.0 gthread-2.0' in "Project->Build Option- >Linker Setting->Other linker option")
  • Page 48 1. Press the "Start" button to test DIO function 2. Press the "Enable" button to test WDT function 3. Press the "Disable" button to disable WDT 4. Check the "Enable Loop" box and press "Enable" to do WDT loop test 5.
  • Page 49 Introduction IO function In fi le SMBus.c void SMBusIoWrite(BYTE byteOffset,BYTE byteData) outb( byteData , m_SMBusMapIoAddr + byteOffset); BYTE SMBusIoRead(BYTE byteOffset) DWORD dwAddrVal; dwAddrVal = inb(m_SMBusMapIoAddr + byteOffset); return (BYTE)(dwAddrVal & 0x0FF); Initial internal F75111 void F75111::InitInternalF75111() this->Write_Byte(F75111_INTERNAL_ADDR,GPIO1X_CONTROL_MODE ,0x00); //set GPIO1X to Input function this->Write_Byte(F75111_INTERNAL_ADDR,GPIO3X_CONTROL_MODE ,0x00);...
  • Page 50 Get Input value BYTE F75111::InterDigitalInput() BYTE byteGPIO1X = 0; BYTE byteGPIO3X = 0; BYTE byteData = 0; this->Read_Byte(F75111_INTERNAL_ADDR,GPIO1X_INPUT_DATA,&byteGPIO1X) ; // Get value from GPIO1X this->Read_Byte(F75111_INTERNAL_ADDR,GPIO3X_INPUT_DATA,&byteGPIO3X) ; // Get value from GPIO3X byteGPIO1X = byteGPIO1X & 0xF0; // Mask unuseful value byteGPIO3X = byteGPIO3X &...
  • Page 51 //-------------------------------------------------------------------------------------------------------- #defi ne F75111_INTERNAL_ADDR 0x9C OnBoard F75111 Chipset #defi ne F75111_EXTERNAL_ADDR 0x6E External F75111 Chipset //-------------------------------------------------------------------------------------------------------- #defi ne F75111_CONFIGURATION 0x03 Confi gure GPIO13 to WDT2 Function //-------------------------------------------------------------------------------------------------------- #defi ne GPIO1X_CONTROL_MODE 0x10 Select Output Mode or Input Mode #defi ne GPIO2X_CONTROL_MODE 0x20 Select GPIO2X Output Mode or Input Mode #defi...

  • Page 52: Ckm1: Kb/Ms Port 1X6Pin (1.25Mm) Wafer

    3-7 CKM1: KB/MS port 1x6pin (1.25mm) Wafer PIN NO. DESCRIPTION CKM1 Keyboard Data Keyboard Clock pin1 Mouse DATA Mouse Clock 3-8 CU1/2/3/4: USB3.0 Port 1/2/3/4 Type A Connector PIN NO. DESCRIPTION PIN NO. DESCRIPTION VBUS SS_RX- SS_RX+ SS_TX- SS_TX+ Note: the power supply 0.9A for each USB3.0 respect specifi cation. CU1, USB3.0 CU3, USB3.0 CU4, USB3.0...

  • Page 53: Usb Interface

    3-9 USB 2.0 Interface CU8/9/10 USB2.0 port (1x4pin 1.25mm Wafer) PIN NO DESCRIPTION DATA- DATA+ pin1 CU10 pin1 pin1...

  • Page 54: Cl1/2/3/4/5: Rj45 Lan1/2/3/4/5 Connector

    3-10 CL1/2/3/4/5: RJ45 LAN1/2/3/4/5 Connector PIN NO DESCRIPTION PIN NO DESCRIPTION MDI0+ MDI2- MDI0- MDI1- MDI1+ MDI3+ MID2+ MDI3- LAN CL3 LAN CL4 LAN CL5 LAN CL1 LAN CL2 3-11 CO1: I C Bus 4pin (1.25mm) Wafer PIN NO DESCRIPTION +3.3V C Clock C DATA...

  • Page 55: Coh1: +12V Heater (1X2Pin 2.0Mm Wafer)

    3-12 COH1: +12V Heater (1x2pin 2.0mm Wafer) PIN NO DESCRIPTION +12V Note: Then +12V will powered when adapter plug-in. COH1 pin1 3-13 CPI1: DC Power input (2x4pin 2.0mm Wafer) (Red) PIN NO DESCRIPTION 3,4,5,6 DC-IN 1,2,7,8 Note: Very important check DC-in Voltage CPI1 pin1...

  • Page 56: Cpo1: +12V/+5V Dc Voltage Output Wafer Connector (Black)

    3-14 CPO1: +12V/+5V DC voltage output wafer connector (Black) (1x4pin 2.0mm) PIN NO. DESCRIPTION +12V * * Note: Attention! Check Device Power in spec CPO1 pin1...

  • Page 57: Edp1: Edp Interface (2X10 Pin 1.25Mm Wafer)

    3-15 EDP1: eDP interface (2x10 pin 1.25mm wafer) PIN NO. DESCRIPTION PIN NO. DESCRIPTION Lane-0-DATA- +12V Lane-0-DATA+ +12V Lane-1-DATA- Lane-1-DATA+ Backlight Enable PWM dimming C Data +LCD(5V or 3.3V) C Clock +LCD(5V or 3.3V) eDP Aux+ +LCD(5V or 3.3V) eDP Aux- Note: 1.

  • Page 58: Eio1: Eio Pin 2X20 Pin Header

    3-16 EIO1: eIO PIN 2x20 PIN HEADER PIN NO. DESCRIPTION PIN NO. DESCRIPTION +12V +12V PLTRST PCIE_RX_P PCIE_RX_N PCIE_TX_N PCIE_CLK_P PCIE_TX_P PCIE_CLK_N PCIE_WAKE_N SMB_CLK USB DATA+ SMB_DATA USB DATA- SLP_S3_N +12V PWRBTN_N +12V +12V +12V Note: that EIO interface only support PCIe X1. The PIN4,24,34,36 is +3.3V Level signal.

  • Page 59: Hdmi1/Hdmi2: Hdmi Connector

    3-17 HDMI1 / HDMI2: HDMI connector PIN NO. DESCRIPTION PIN NO. DESCRIPTION TMDS DATA2+ TMDS DATA2- TMDS DATA1+ TMDS DATA1- TMDS DATA0+ TMDS DATA0- TMDS CLK+ TMDS CLK- DDC CLOCK DDC DATA H.P. Detect HDMI, HDMI1 HDMI, HDMI2...

  • Page 60: Sata Interface

    3-18 SATA interface SATA1/2: SATA port 1x7pin Connector PIN NO. DESCRIPTION Note: 1. CPO1 provide SATA HDD power +12V, GND, +5V SATA2 SATA1...

  • Page 61: Sodimm1/2 Socket

    3-19 SODIMM1/2 socket SODIMM1 SODIMM2 Note: 1.SODIM1 / SODIM2: SO-DIMM DDR4 1.2V DRAM Socket 2. Only Support un-buffer type module 3-20 SWP1 Power On/off switch Wafer (1x2 pin 2.00mm wafer) PIN NO. DESCRIPTION Power button pin Power button GND SWP1 pin1...

  • Page 62: Module Socker

    3-21 Module socket MPCE 1/2 PCI Express mini card PIN NO. Description PIN NO. Description +3.3V +1.5V PCIe-CLK- PCIe-CLK+ Reset PCIe-RX-/mSATA-RX+ +3.3V PCIe-RX+/mSATA-RX- pin52 pin52 +1.5V SMB-CLK PCIe-TX-/mSATA-TX- SMB-DATA pin1 pin1 PCIe-TX+/mSATA-TX+ MPCE1 MPCE2 USB-DATA- USB-DATA+ +3.3V +3.3V +1.5V mSATA/PCIe detect +3.3V Note: 1.

  • Page 63: Connector Wafer Of Compatible Brand And Part Number List

    3-22 Connector wafer of Compatible Brand and part number list Location CKTS PITCH Brand Name Mating connector Cable housing 2x5 10Pin 2.00mm B10B-PHDSS PHDR-10VS CALR1 1x4 4Pin 1.25mm MOLEX 53047-0410 51021-0400 2x5 10Pin 2.00mm B10B-PHDSS PHDR-10VS 2x5 10Pin 2.00mm B10B-PHDSS PHDR-10VS CFP1 2x5 10Pin...

  • Page 64: Introduction Of Bios

    Chapter-4 Introduction of BIOS The BIOS is a program located in the Flash Memory on the motherboard. This program is a bridge between motherboard and operating system. When you start the computer, the BIOS program gains control. The BIOS fi rst operates an auto-diagnostic test called POST (Power on Self Test) for all necessary hardware, it detects the entire hardware devices and confi...

  • Page 65: Bios Menu Screen & Function Keys

    4-2 BIOS Menu Screen & Function Keys In the above BIOS Setup main menu of, you can see several options. We will explain these options step by step in the following pages of this chapter, but let us fi rst see a short description of the function keys you may use here: ●...

  • Page 66: Getting Help

    4-3 General Help Status Page Setup Menu / Option Page Setup Menu Press F1 to pop up a help window that describes the appropriate keys to use and the possible selections for the highlighted item. To exit the Help Window, press <Esc>.

  • Page 67: Menu Bars

    4-4 Menu Bars There are six menu bars on top of BIOS screen: Main To change system basic confi guration Advanced To change system advanced confi guration Security Password settings Power PME & Power button settings Boot Exit Save setting, loading and exit options. User can press the right or left arrow key on the keyboard to switch from menu bar.

  • Page 68: Advanced

    4-6 Advanced Boot Confi guration Please refer section 4-6-1 Graphics Confi guration Please refer section 4-6-2 PCH-IO Confi guration Please refer section 4-6-3 PCH-FW Confi guration Please refer section 4-6-4 SIO F81804 Please refer section 4-6-5 Console Redirection Please refer section 4-6-6...

  • Page 69: Boot Configuration

    4-6-1 Boot Confi guration Numlock Select Power-on state for Numlock, default is <Off>...

  • Page 70: Graphics Configuration

    4-6-2 Graphics Confi guration GTT Size Graphics Translation Table Size. The optional settings are: 2MB, 4MB, 8MB (default) Aperture Size The optional settings are: 128MB, 256MB, 512MB, 1024MB (default), 2048MB DVMT Pre-Allocated Use this item to select DVMT 5.0 pre-allocated (fixed) graphics memory size used by the internal graphics device.

  • Page 71: Display Configuration

    4-6-2-1 ► Display Confi guration Boot Display To select the displays priority to eDP, HDMI 1 or HDMI 2...

  • Page 72: Pch-Io Configuration

    4-6-3 PCH-IO Confi guration PCI Express Confi guration Please refer section 4-6-3-1 SATA And RST Confi guration Please refer section 4-6-3-2 HD Audio Confi guration Please refer section 4-6-3-3 PCH LAN Controller To enable / disable onboard NICs.

  • Page 73: Pci Express Configuration

    4-6-3-1 ► PCI Express Confi guration PCI Express Root Port 09 for MPCE1 Please refer section 4-6-3-1-1 PCI Express Root Port 10 for MPCE2 Please refer section 4-6-3-1-1 PCI Express Root Port 11 for eIO port 1 Please refer section 4-6-3-1-3...

  • Page 74: Pci Express Root Port 09 For Mpce1

    4-6-3-1-1 ► PCI Express Root Port 09 for MPCE1 PCI Express Root Port 09 for MPCE1 The optional settings are: Enabled(default), Disabled. Select PCI Express port speed. The optional settings are: Auto, Gen1(default), Gen2, Gen3...

  • Page 75: Pci Express Root Port 10 For Mpce2

    4-6-3-1-2 ► PCI Express Root Port 10 for MPCE2 PCI Express Root Port 10 for MPCE2 The optional settings are: Enabled(default), Disabled. Select PCI Express port speed. The optional settings are: Auto, Gen1(default), Gen2, Gen3...

  • Page 76: Pci Express Root Port 11 For Eio Port 1

    4-6-3-1-3 ► PCI Express Root Port 11 for eIO port 1 PCI Express Root Port 11 for eIO port 1 The optional settings are: Enabled(default), Disabled. Select PCI Express port speed. The optional settings are: Auto, Gen1(default), Gen2, Gen3...

  • Page 77: Sata And Rst Configuration

    4-6-3-2 ► SATA And RST Confi guration SATA Controller Use this item to Enable or Disable SATA Device. The optional settings are: Enabled(default) or Disabled SATA Mode Selection Support AHCI Mode only.

  • Page 78: Hd Audio Configuration

    4-6-3-3 ► HD Audio Confi guration HD-Audio Supported. The optional settings are: Enabled (default) or Disabled...

  • Page 79: Pch-Fw Configuration

    4-6-4 PCH-FW Confi guration ME State The optional settings are: Enabled (default) or Disabled Manageability Features State The optional settings are: Enabled or Disabled (default)

  • Page 80: Sio F81804

    4-6-5 SIO F81804 Serial Port 1/2 Use this item to enable or disable serial port. The optional settings are: Enabled (default), Disabled. Serial Port A Base IO Address / Interrupt / Serial Mode Use this item to select an optimal setting for super IO device. The optional settings are: IO=3F8h;...

  • Page 81: Hardware Monitor

    Mode RS232 (default) / RS485 / RS422 Power Loss setting This item specifi es whether your system will reboot after a power failure or interrupt occurs. [Keep Last state] Restores the system to the status before power failure or interrupt occurred. [Always on] Leaves the computer in the power on state.

  • Page 82: Console Redirection

    4-6-6 Console Redirection Console Serial Redirect Use this item to enable or disable Console Redirection. The optional settings are: Enabled, Disabled (default).

  • Page 83: Security

    4-7 Security Supervisor Password To set up an Supervisor password 1. Select Supervisor Password. The screen then pops up an Create New Password dialog. 2. Enter your desired password that is no less than 3 characters and no more than 10 characters.

  • Page 84: Power

    4-8 Power ACPI S3 Select ACPI sleep state (S3) supported The optional settings: Enabled, Disabled(default) Wake On USB Wake on USB from Mouse or Keyboard interrupt signal when system in S3 state The optional settings: S3(default), Disabled Wake On LAN Wake on LAN from LAN1 when system in S3 S5, or both of them state The optional settings: S3(default), S5, S3/S5, Disabled Wake On PS2...

  • Page 85: Boot

    4-9 Boot Boot type Select boot type for Dual type, Legacy boot type or UEFI boot type, default is UEFI boot type Quiet Boot The optional settings are: Enabled (default), Disabled. Network Stack Enabled for PXE function, default is disabled. Determine which EFI storage device for booting, this item will not show on this page if there is no any storage device found.

  • Page 86: Exit

    4-10 EXIT Exit Saving Changes This item allows user to reset the system after saving the changes. Save Change Without Exit This item allows user to saving the changes but doesn’t restart. Exit Discard Changes This item allows user restart the system but no saving the changes Load Optimal Default Use this item to restore the optimal default for all the setup options.

  • Page 87: Chapter 5 Driver Introduction

    Chapter-5 DRIVER INSTALLATION There is a system installation DVD in the package. This DVD does not only include all the drivers you need but also some other free application programs and utility programs. In addition, this DVD also includes an auto detect software telling you which hardware is installed and which driver is needed so that your system can function properly.
  • Page 88 AUTOMATIC DRIVER INSTALLATION menu 1. INF Install Intel Skylake or Kaby Lake chipset driver 2. VGA Install onboard VGA driver 3. HD Audio Install HD Audio Codec driver 4. ME Tool Install Intel Management Engine driver 5. LAN To the LAN driver Readme fi le 6.

  • Page 89: Inf Install Intel Skylake Kaby Lake Chipset Driver

    5-1 INF Install Intel Skylake Kaby Lake Chipset Driver (example for WIN10 64bit) 1. At the "AUTOMATIC DRIVER INSTALLATION 2. At the "Intel® Chipset Device Software" menu"screen, click "INF". screen, click "Next". 3. At the "License Agreement" screen, 4. At the "Readme File Information" screen, click "Accept".
  • Page 90 5. Progressing 6. Click "Restart Now" then to restart the computer. NOTE: SYSTEM INSTALL will auto detect fi le path X:\driver\sky_lake\INF\SetupChipset.exe...

  • Page 91: Vga Install Intel Skylake & Kaby Lake Vga Driver

    5-2 VGA Install Intel Skylake & Kaby Lake VGA Driver (example for WIN10 64bit) 1. At the "AUTOMATIC DRIVER INSTALLATION 2. At the "Welcome to the Setup menu" screen, click "VGA". Programscreen, Click "Next". 3. At the "License Agreement" screen, Click "Yes". 4.
  • Page 92 5. At the "Setup Progress" screen, Click "Next". 6. Click "Finish" to restart the computer. NOTE: SYSTEM INSTALL will auto detect fi le path For Windows 64-bit X: \driver\sky_lake\VGA\X64\Setup.exe For Windows 32-bit X:\driver\sky_lake\VGA\X86\Setup.exe...

  • Page 93: Hd Audio Install High Definition Audio Driver

    5-3 HD Audio Install High Defi nition Audio Driver (example for WIN10 64bit) 1. At the "AUTOMATIC DRIVER INSTALLATION 2. Click "Next". menu". 3. Click "Next". 4. Click "Finish" then to restart the computer. NOTE: SYSTEM INSTALL will auto detect fi le path For Windows 64-bit, X:\driver\sky_lake\Audio\0006-64bit_Win7_Win8_Win81_Win10_R279 For Windows 32-bit...

  • Page 94: Me Tool Install Intel Usb 3.0 Me Driver

    5-4 ME Tool Install Intel USB 3.0 ME Driver (example for WIN10 64bit) 1. At the "AUTOMATIC DRIVER INSTALLATION 2. At the "Welcome to the Setup menu" screen, click "ME Tool". Programscreen, Click "Next". 3. At the "License Agreement" screen, Click "□" 4.

  • Page 95: Lan Install Lan Driver (Example For Win10 64Bit)

    NOTE: SYSTEM INSTALL will auto detect fi le path X: \driver\sky_lake\ME\SetupME 5. Click "Finish" to fi nish the setup. 5-5 LAN Install LAN Driver (example for WIN10 64bit) 1. At the "AUTOMATIC DRIVER INSTALLATION 2. At the "Intel Network Connections" screen, menu"...
  • Page 96 3. Click "Next". 4. At the "License Agreement” screen, Click "□" "Next". 5. Click "Next". 6. Click "Yes". 7. Click "Install". 8. Click "Finish" to fi nish the setup.

  • Page 97: Items For Windows 7 Installation

    NOTE: SYSTEM INSTALL will auto detect fi le path X:\driver\sky_lake\LAN\Autorun.exe 5-6 Items for Windows 7 installation Note : Before Windows 7 installation, USB 3.0 Driver MUST rebuild in a new DVD or in a pen-drive. Please following the steps as below step1 Create a folder X:/win7/boot &...

  • Page 98: Kmdf Install Windows Update Package (For Win 7 Only)

    5-6-1 KMDF Install Windows Update package (FOR Win 7 only) 1. At the "AUTOMATIC DRIVER INSTALLATION 2. Click "Yes". menu",click "KMDF". 3. Click "Restart Now" to restart the computer. NOTE: SYSTEM INSTALL will auto detect fi le path For Windows 7 64-bit, X:\driver\sky_lake\ME\KMDF_Win7\kmdf-1.11-Win-6.1-x64 For Windows 7 32-bit, X:\driver\sky_lake\ME\KMDF_Win7\kmdf-1.11-Win-6.1-x86...

  • Page 99: Me Tool Install Intel Me Tool Driver For Win7 Please Install Kmdf

    5-6-2 ME Tool Install Intel ME Tool driver for WIN7 Please install KMDF fi le fi rst. 1. At the "AUTOMATIC DRIVER INSTALLATION 2. Click "Yes". KMDF fi le must being installed menu", click "ME Tool". before ME Tool installation. 3.

  • Page 100: Usb 3.0 Install For Win7

    5. Click "Next". 6. Click "Finish" to fi nish the setup. NOTE: SYSTEM INSTALL will auto detect fi le path X: \driver\sky_lake\ME\SetupME 5-6-3 USB 3.0 Install for WIN7 1. At the "AUTOMATIC DRIVER INSTALLATION 2. Click "Next". menu", click "USB 3.0".
  • Page 101 3. Click "Yes". 4.Click "Next ". 5. Click "Next". 6. Click "Finish" to fi nish the setup. NOTE: SYSTEM INSTALL will auto detect fi le path For Windows 7 32 / 64-bit, X:\driver\sky_lake\USB 3.0\Setup.exe...

  • Page 102: Tpm 2.0

    5-6-4 TPM 2.0 For Windows 7 Ultimate and i7 CPU only...

  • Page 103: How To Update Insyde Bios

    STEP 3. Copy the latest BIOS for your LEX motherboard from our website to your bootable disc. STEP 4. (Here take 3I610DW as an example, please enter your motherboard’s name) Insert your bootable disc into X: (X could be C:, A: or others.

  • Page 104: Appendix A: Power Consumption Test

    Appendix A: Power Consumption Test Condition Item Spec Celeron 3955U 2.00GHz and i7 6600U 2.60GHz Memory DDR4 2133 16GB x 2 Operating System Windows 10 Enterprise 64 bit Test Program 3D Mark 06 HDD 2.5" SATA 500GB mSATA 16GB Test Result for reference only ! Start up Operation Shut down...

  • Page 105: Appendix B: Resolution List

    Appendix B: Resolution list 640 x 480 x ( 256 / 16bit / 32bit ) 800 x 600 x ( 256 / 16bit / 32bit ) 1024 x 768 x ( 256 / 16bit / 32bit ) 1152 x 864 x ( 256 / 16bit / 32bit ) 1280 x 600 x ( 256 / 16bit / 32bit ) 1280 x 720 x ( 256 / 16bit / 32bit ) 1280 x 768 x ( 256 / 16bit / 32bit )

Table of Contents