Advertisement
Option 2 –
Assembly to Additional Cylinder Mate CM6000 Units
PAC Cylinder Mates are designed to attached together to form storage units. Cylinder Mates can be
arranged in various configurations to accommodate storage space.
Items Required for this step
Carriage Bolt
PAC Fastener
P/N 2037
Kit
P/N 7037
¼-20 Flanged Nut
Small 7/16
ratcheting Wrench
FIGURE 2a
Qty
¼-20 x ¾
4
4
P/N 2042
not
included
When attaching an additional Cylinder Mate to
the top of another (See Figure 2a) , use the same
(4) mounting locations as the one below.
When attaching an additional Cylinder Mate to
the side of another, use the mounting locations
as shown in Figure 2b. Only seven fasteners are
required for side mounting.
page2
FIGURE 2b
Advertisement
