Related Manuals for NewStar Neomounts Pro
Summary of Contents for NewStar Neomounts Pro
- Page 2 This instruction is applicable to all the following models and related extended products NMPRO-WMB2 Tilt arms NMPRO-WMB3 Tilt arms NMPRO-WMB4 Tilt arms Be sure to read this entire manual thoroughly and you fully understand all the instructions and warning before attempting to begin your installation.
-
Page 3: Required Tools
Parts list (NMPRO-WMB2) M5X15 M6X15 M8X15 M8X12 Lag bolt Lag bolt 3mm 5mm Ø6XØ6.2X1.5 Ø6XØ8.2X1.5 1000mm*1+480mm*2 Parts list (NMPRO-WMB3) M5X15 M6X15 M8X15 M8X12 Lag bolt Lag bolt 3mm 5mm Ø6XØ6.2X1.5 Ø6XØ8.2X1.5 1000mm*3+480mm*1 Parts list (NMPRO-WMB4) M5X15 M6X15 M8X15 M8X12 Lag bolt Lag bolt 3mm 5mm Ø6XØ6.2X1.5... -
Page 4: Installation
Installation 1000mm 480mm 1000mm Lock on... - Page 5 480mm 1000mm NMPRO-WMB2 480mm 1000mm 1000mm NMPRO-WMB3 480mm 1000mm 1000mm 1000mm 1000mm NMPRO-WMB4 480mm 1000mm...
- Page 6 BRICK OR CONCRETE WOOD Installing the Mounting Brackets After you have mounted the first bracket as described, draw a horizontal line (the use of a laser leveller may help). Alignment line Alignment line You can place the second bracket by tape measure proceed in this way with the other brackets.
- Page 7 A1/A2/A3 Wire Height adjustment 10mm...
Need help?
Do you have a question about the Neomounts Pro and is the answer not in the manual?
Questions and answers