Table of Contents
Advertisement
MT321 Quick Installation Guide V1.2
Chapter 3: Getting Started
Disconnect all power supplies to the board before installing a module to prevent
damage to the board and module.
3.1 Installing the Mini PCIe module
1. Align the notch on the Mini PCIe module with the counterpart on the Mini PCIe slot then insert
the module at 30° angle.
2. Once MT321 has been fully inserted, push down the module until the screw holes align with the
mounting holes. Secure the module with screws to the standoffs.
www.perfectron.com
11
Advertisement
Table of Contents
