PowerOak K2 Manual

PowerOak K2
Laptop Power Bank
After-sale service commitments 24 month warranty
Email: info@poweroak.nl
Web: www.poweroak.nl
We Suggest Fully Charge Our K2 Power Bank Every Six Months
Product Parameters
Battery: Li-Polymer battery
Capacity:
50000mAh
Charger input:
AC 100V~230V
Input:
DC 16.8V/2.5A
Output: USB1&2: 5V/2.1A
USB3&4: 5V/1.0A
DC1: 12.0V/2.5A
DC2: 20.0V/3.0A
Charging time: 6~8 hours
Cycle life: ≥1000 times
Working temperature:
0 ℃ ~45 ℃
Storage temperature:
-10 ℃ ~40 ℃
Product size: 206.9×136×33mm
Product Accessory
Laptop power bank:
X1
AC charger:
X1
USB cable: X1
DC Adaptor : X1
Laptop charge connector:
X10
Multifunction bag:
X1
Manual: X1
Safety Guidelines
Please check the charging voltage of your laptop first, make
sure the charging voltage is consistent with the output voltage
of K2 power bank. Do not mix up DC 12V and DC 20V output voltage,
otherwise wrongly operation may cause damage of your device.
Please charge K2 power bank with our attached original adapter.
Prohibit using in bathrooms or damp places or other places
easy access to water.
Keep the product out of children's reach.
Don't make reverse connection of the output and input port.
Don't put this product into fire.
Don't use this product in high temperature environment
(above 60℃).
Please don't bump/beat/shake the product, otherwise the
internal circuit may get damaged.
Don't charge or use this product in inflammable environment.
Only professional technicians or designated maintenance
agencies are allowed to disassemble or repair this product.
Unauthorized disassembling or repair may lead to damage
and danger.
Please make sure the charging voltage of the digital devices
match the output voltage port of K2 when charge for digital
devices such as cellphone/laptop/DV.
Product Overview
Product Standard: GB31241-2014
6
1 2 3 4 5 7
Charging port Output port: USB1 5V/2.1A
6
1
Capacity indicators USB2 5V/2.1A
2
On-off/ function button
3
Output port: USB3 5V/1A
7
Output port: 20.0V/3A
4
USB4 5V/1A
Output port: 12.0V/2.5A
5
Charging K2
AC Charger
Put DC output connector of AC charger into K2's input port, and
connect to wall AC outlet.
Product Characters
1.
Support charging and discharging at the same time.
2.
Press ON-button: fast turn on, LED indicates the remaining power.
3.
Press OFF-button: stay 2s for power off.
4.
Auto turn off: K2 turns off automatically in 30s if no load
5. LED lights in discharging status
0-25%: LED1 lighting
25%-50%: LED1, LED2 lighting
50%-75%: LED1, LED2, LED3 lighting
75%-100%: LED1, LED2, LED3, LED4 lighting
Low voltage alarm: LED 1 flashing