Maintenance; Optional Accessories - Makita DUR141 Instruction Manual

NOTE:
• Before rotating the shaft, it needs to be fully
shortened or extended.
• After changing to the edger position, make sure
that the motor housing and shaft are locked.
To obtain a good result of finish cutting, move parallel to
the edge you are going to perform an edging work.
Cutting the grass in a tight place or
on a slope
WARNING:
• When cutting the grass on a slope, be careful of
stones, grass and other foreign objects thrown
from the cutting head area.
• When cutting the grass on a slope, make sure
that you always keep a good and stable footing.
► 1 . Lock button
To ease the work in a tight place which restricts the
height, such as cutting the grass under an outdoor
wood deck and similars, push the lock button and then
bend down the cutting head so that the shaft is parallel
to the ground surface. Adjusting the cutting head angle
properly in this way helps you cut the grass on a slope.

MAINTENANCE

WARNING:
•
NOTICE:
Never use gasoline, benzine, thinner, alcohol or
the like. Discoloration, deformation or cracks may
result.
To maintain product SAFETY and RELIABILITY,
repairs, any other maintenance or adjustment should
be performed by Makita Authorized or Factory Service
Centers, always using Makita replacement parts.
OPTIONAL
ACCESSORIES
CAUTION:
•
If you need any assistance for more details regard-
ing these accessories, ask your local Makita Service
Center.
• Nylon cutting head
• Nylon cords
• Shoulder strap
• Goggles
1
• Makita genuine battery and charger
NOTE:
•
MAKITA LIMITED WARRANTY
Please refer to the annexed warranty sheet for the
most current warranty terms applicable to this product.
If annexed warranty sheet is not available, refer to the
warranty details set forth at below website for your
respective country.
United States of America: www.makitatools.com
Canada: www.makita.ca
Other countries: www.makita.com
14 ENGLISH
Always be sure that the tool is switched
off and battery cartridge is removed before
attempting to perform inspection or main-
tenance on the tool. Failure to switch off and
remove the battery cartridge may result in seri-
ous personal injury from accidental start-up.
These accessories or attachments are recom-
mended for use with your Makita tool specified
in this manual. The use of any other accessories
or attachments might present a risk of injury to
persons. Only use accessory or attachment for
its stated purpose.
Some items in the list may be included in the
tool package as standard accessories. They
may differ from country to country.