English - Philips HP4646/08 User Manual

ENGLISH

6
Introduction
This new Philips SalonStraight Want2Move straightener provides ultra -
fast shiny straight styles, combining professional performance with
purse-size portability.
The ceramic-coated plates ensure ultra-smooth gliding through the hair,
allowing you to style at high temperatures in a quick and caring way.
The slimline design enables you to achieve straightness from the roots
and versatility in styling from pin curls to flicks.
General description (fig. 1)
A Ceramic-coated plates
B Cool tip area
C Slimline design
D Folding system
E On/off button with power-on indicator
F Easy-lock system
G Swivel cord with cord holder
H Travel pouch
Important
Read these instructions for use carefully before using the appliance and
save them for future reference.
Check if the voltage indicated on the appliance corresponds to
the local mains voltage before you connect the appliance.
This appliance is suitable for mains voltages from 100 to 240 volts.
Check the condition of the mains cord regularly. Do not use the
appliance if the plug, the cord or the appliance itself is damaged.
If the mains cord is damaged, it must be replaced by Philips, a
service centre authorised by Philips or similarly qualified persons
in order to avoid a hazard.
Keep this appliance away from water! Do not use this product
near or over water contained in baths, washbasins, sinks etc.
When used in a bathroom, unplug the appliance after use since
the proximity of water presents a risk, even when the appliance is
switched off.