Table of Contents
Advertisement
EnglisH
1
Note: There are two ways to connect the straightening comb: with the lever
on the same side as the control slide or on the opposite side. However, as the
lever is rather long and partly covers the control slide, it is most convenient to
connect the straightening comb the other way round.
Put the plug in the wall socket.
Set the control slide to the preferred setting to switch on the
appliance. (Fig. 6)
Place the straightening comb in the hair (Fig. 17).
5
Press the lever towards the handle to close the brush (Fig. 18).
6
Make brushing movements from the top of the head downwards.
7
When you have finished styling your hair, switch off the appliance.
Cleaning
Never rinse the appliance with water.
Never immerse the appliance in water or any other liquid, nor rinse it
under the tap.
1
Switch off the appliance and unplug it.
Let the appliance and the attachments cool down completely on a
heat-resistant surface.
Remove the attachments from the appliance before you clean them.
Remove hairs and dust from the attachments. Then clean the
attachments with a moist cloth or rinse them under the tap.
Note: If you have used styling products on your hair before or during styling,
clean the attachments thoroughly with a moist cloth after use.
Note: Make sure the attachments are dry before you use or store them.
5
Clean the appliance with a small brush or a dry cloth.
Advertisement
Table of Contents
