Advertisement
Quick Links
Indivision ECS V2 short manual
Dear customer,
thank you for purchasing a product from Individual Computers. We're sure that your new
flickerfixer will satisfy all your needs. However, we would like to emphasise that installing
the product in an Amiga is very complicated. The installation steps require a lot of
experience and skills. Please read this manual throughly to ascertain if you can perform
the installation. If you have any doubts regarding installation, please seek help from an
expert.
Please read this guide carefully before commencing installation. Ensure you take suitable
anti-static precautions. Serious damage may result from failure to accurately follow this
guide. Individual Computers cannot be held responsible for incorrect installation of this
product, including bent/broken pins, damaged motherboard or damage to the Indivision
ECS V2 unit itself.
A PDF-version of this short manual is available in our Wiki at wiki.icomp.de. This online
version of this manual contains high-resolution colour pictures. The zoom-function of a
PDF reader will give you a lot more detail in the pictures of this manual.
Step 1: Open the computer and locate the Denise-chip
Open the computer and remove everything that may cover the Denise-chip, such as Zorro-
cards or the RF-shield. The following pictures show the most common Amiga models:
Amiga 500
Amiga 2000
Amiga 3000
CDTV
Advertisement
Summary of Contents for Individual Computers Indivision ECS V2
- Page 1 Indivision ECS V2 short manual Dear customer, thank you for purchasing a product from Individual Computers. We're sure that your new flickerfixer will satisfy all your needs. However, we would like to emphasise that installing the product in an Amiga is very complicated. The installation steps require a lot of experience and skills.
- Page 2 For installation in an A3000T, A1000 and A600, additional parts are required that are not included in the normal Indivision ECS V2 package. If you want to install the flickerfixer in one of these computers, please download the respective manual from our Wiki wiki.icomp.de.
- Page 3 CDTV Step 4: connect the VGA-cable Plug the included cable into the black VGA-connector of your Indivision ECS V2. When routing the cable through your computer, please ensure that the cable cannot be damaged upon re-assembly of the computer. For best picture quality, the 15-pin VGA connector should be mounted on a grounded metal part.
- Page 4 Indivision ECS V2 configuration tool in the iComp-drive Indivision ECS V2 is configured at the factory to output at 72Hz refresh rate. This rate corresponds to the VESA 800x600 mode, which is standard for today’s VGA monitors and flat screens.