Download Print this page

SKEDCO SKED Manual

Unroll stretcher and lay flat

Download this manual

TO UNROLL SKED

1, REMOVE SKED

PLACE ON GROUND.

3, BEND THE SKED

AND BACK ROLL. REPEAT WITH OPPOSITE END

OF STRETCHER. IN COLD WEATHER, IT MAY BE

NECCESSARY TO REVERSE ROLL IT TWICE.

P.1

*STEEL BUCKLES

*COBRA BUCKLES

FROM PACK AND

OVER YOUR FOREARM

STRETCHER AND LAY FLAT

2, UNFASTEN RETAINER STRAP. STEP

ON FOOT END OF SKED

COMPLETELY TO OPPOSITE END.

4, SKED

FLAT.

AND UNROLL

STRETCHER WILL NOW LAY

Need help?

Do you have a question about the SKED and is the answer not in the manual?

Page 1 *STEEL BUCKLES *COBRA BUCKLES ® 1, REMOVE SKED FROM PACK AND 2, UNFASTEN RETAINER STRAP. STEP PLACE ON GROUND. ON FOOT END OF SKED ® AND UNROLL COMPLETELY TO OPPOSITE END. 3, BEND THE SKED OVER YOUR FOREARM 4, SKED ®...
Page 2 **STEEL DOUBLE BAR BUCKLES: PLACE CONTINUE TO ROLL THE SKED ® USING RETAINER STRAP WITH INSIDE OF BUCKLE KNEE TO KEEP THE ROLLED STRETCHER FACING UP UNDER FOOT END OF SKED ® SMALL. (SEE PHOTO IN STEP 4) WHEN USING THE SKED ®...