Home Easy HE-104 Quick Start Manual

HOME
easy
RE-INVENTING THE HOME
The HE-104 Signal Booster unit is an
expansion unit for the HomeEasy range of
products, giving additional 30metre
transmission range.
The HE-104 is battery powered and
suitable for outdoor use (IP56 waterproof ).
Product Operation:
The HE-104 operates as a relay sation, resending the signal, so that the
combined range is upto 60metres.
1
2
3
4
G
I II III IV
HOME
easy
For the booster unit to operate correctly, both the booster unit and the
plug-in receiver or module must be paired with the remote control.
See Pairing with Remote control.
Installation:
The HE-104 Signal Booster
can be wall mounted using
the key hole slot and screws
provide or placed on a shelf or
table using the built-in stand.
HE-104 Signal Booster
HOME
easy
V1.0
Pairing/Deleting Remote:
Pairing with Remote Control:
Up to Six remote control units can be paired with each Signal Booster. To
program the signal booster, insert the batteries into the unit and press the
"Learn" button located inside the battery compartment. The LED will start to
flash, now press the selected "On" button on the remote control, the LED will
stop flashing. The units are now paired together, you can test this by pressing
the selected "On/Off" button.
Deleting Remote Control:
To delete a remote control that has been paired with a HE-104 signal booster,
simply press the "Learn" button. The LED will start to blink; press the "Off"
button on the remote control, the LED will blink twice to confirm that the
remote control has been removed from the signal boosters' memory.
Signal Booster reset:
To delete all the remote control units from the memory of the Signal
Booster, hold the "Learn" button for more than 6 seconds, the LED will
start to blink quickly. Press and hold the "Learn" button again, the LED will
blink twice to confirm that all paired remote controls have been deleted
from the Signal Booster's memory.
LED
Learn Button