VDH-GK350A User manual CONTENTS System Operations ........................1 1. System Login ........................1 2. Information ........................2 3. System Status ........................5 4. Map ............................ 8 5.1 Backup ........................14 6. Settings ..........................20 6.1 System Info ......................20 6.2 HDD Info ........................ 20 6.3 Network .........................
VDH-GK350A User manual System Operations System Login Input GK350A to enter login page Default IP address: 192.168.1.111 For the first-time login, time zone and NTP must setup. Caution! IE11 not supported Note: The setup page only shows in the first initial setup.
VDH-GK350A User manual Information After successfully pointing a new device to the GK350A, it will show on the [Dashboard page] with its device ID number. IMPORTANT ! If there is a router in the network, then all necessary ports must open.
Page 6
VDH-GK350A User manual Select the new device, then click Add. Add devices successfully Check on the device status to see if the new device has been successfully registered to the GK350A. The device may present in a list or icons.
Page 7
VDH-GK350A User manual time. In icon format, it shows the device’s ID number, driver’s name, vehicle ID, and the last updated date and time.
VDH-GK350A User manual System Status List Format Offline Online Icon Format Offline Online Click on to edit device information. ❶ ❷ ❸ ❹ ❺ ❻ ❼ ❽ ❾ 1. Device ID: Default device ID number cannot change. 2. Driver Name: Default (blank), may manually enter name of the driver.
Page 9
VDH-GK350A User manual 7. bps: bit per second may manually adjust. The actual result depends on data that is sent back to the server. 8. Record Video: Default is enable. Unmark it would disable the video recording feature. Caution! Disabling this feature will not have any video data save.
Page 10
VDH-GK350A User manual The screen will go back to the main page after deleting the selected device...
VDH-GK350A User manual Click Map to get the online and offline vehicle list. Click the device ID to get live view, current location, and route tracking on the map all on one page.
Page 12
VDH-GK350A User manual Move the cursor all the way to the left side of the screen to get the entire vehicle list.
Page 13
VDH-GK350A User manual Playback Click Playback to get the online and offline vehicle list. ...
Page 14
VDH-GK350A User manual Click on the selected vehicle ID to access the Playback interface. Select the date and the hours and minutes on the time bar to access the recorded video.
Page 15
VDH-GK350A User manual GPS Bearing GPS Speedometer Rewind 10 seconds Rewind 5 seconds Slow Motion Reverse (0.2X and 0.5X) Play Pause Fast Forward (2X, 4X, 8X, 16X) Fast Forward 10 seconds ...
Page 16
VDH-GK350A User manual Select channel number to playback. Note: Playback mode may only playback one channel at a time. Switch On the Show GPS Path to get the vehicle traveling path in the selected day.
VDH-GK350A User manual 5.1 Backup Click Backup to set the start time (date and time) of the video. The time duration may set from 1 to 5 minutes per backup file. 5.1.1 Events G-Sensor event triggering and manual recording are two types of...
Page 18
VDH-GK350A User manual 5.1.2 Device ID Select the device ID to view. 5.1.3 Event type: All, G-Sensor, Push button (manual recording), trigger, trigger In, and trigger Out. Select the date and time. Click on to get calendar. Use find the year and monthly calendar.
Page 19
VDH-GK350A User manual Click to select the time in one hour increment. The system finds the events that were created in the selected date and time.
Page 21
VDH-GK350A User manual Fence Fence can set a virtual graphical boundary of each vehicle, total of 20 regions. Click , which it will change to . Begin to set the region. Set trigger IN and OUT. The vehicle that enter and exit the virtual fence will trigger...
Page 22
VDH-GK350A User manual Route Planning Route planning is to set a specific driving route for the vehicles. When the vehicle is off the pre-set course, then the system will create an event. Press Save when finished.
VDH-GK350A User manual Settings 6.1 System Info The System Info shows the system’s hostname, uptime, firmware version, MAC address, firmware version, and firmware release date. 6.2 HDD Info HDD info shows the HDD’s model number, serial number, status, ...
VDH-GK350A User manual Click OK to begin formatting the selecting HDD. 6.3 Network Manually connect the internet Ethernet: Static and PPPoE 6.3.1 Static IP Address: May manually change as needed. Default: 192.168.1.111. 255.255.255.0 Subnet Mask: May manually change as needed. Default: 255.255.255.0.
Page 25
VDH-GK350A User manual 6.3.2 PPPOE Username: (Provided by the ISP) Password: (Provided by the ISP) WAN IP: After the dialing is successful, the IP will be displayed and the vehicle equipment is reported.
Page 26
VDH-GK350A User manual 6.3.3 DDNS Service Provider: CCTVDVR, NO-IP, My online portal Let’s take CCTVDVR SERVER as an example: Server: 123.cctvdvr.com.tw Username: 123 Password: 123 6.3.4 NTP Time Zone: select the current time zone NTP server: Enter the local NTP server location.
Page 28
VDH-GK350A User manual Click user block to get the drop down list, Admin and User 1 ~20. Select Admin to get the highest authority, which can change username and password. Default username: admin. Default password: admin. Press Save when finished.
VDH-GK350A User manual User can set individual username and password for viewing, playback the selected vehicles. Press Save when finished. Note: Username and password must at least four alphabet letters and numbers combined. 6.5 Protocol GPS (UDP): May change as needed. Default: 13579.
Page 30
VDH-GK350A User manual 6.5.1 Cloud Cloud setting must enable to receive event video uploading to the cloud..
Page 31
VDH-GK350A User manual 6.5.2 GPS Relay Below is the GPS Server of the Department of Transportation. Users can not build GPS Servers for such a GPS relay. Events: Enable the event video download to get access to the video. Time duration is between 5 and...
Page 32
VDH-GK350A User manual Google key Apply for a Google Map key to get map access. The map will not work without a Google Map key. Google Maps Platform link: https://developers.google.com/maps/documentation/javascript/get-api-key...
VDH-GK350A User manual 6.6 Configuration Import configuration: locate and import the existing GK350A setting to a new server.
Page 34
VDH-GK350A User manual Export configuration: locate and export the existing GK350A setting. The export file is in gk350a_2.9.4_uci.cfg format. Export Database Exporting the GPS coordinate info...
Page 35
VDH-GK350A User manual Restore Defaults: Check on the keep networking settings box to keep the current network setting. Click Restore to a restore warning window. Click OK to proceed.
VDH-GK350A User manual 6.7 Upgrade Select file location ...
Page 37
VDH-GK350A User manual Click Upload to begin, and wait until it is 100% completion. The system will auto reboot when firmware upgrade is complete.
Page 38
VDH-GK350A User manual Click to get stream status with the following detailed information. HDD write (Bps): data size written on the HDD. Upload (Bps): Uploaded data size from a remote location Download (Bps): Downloaded data size Username and IP address of a remote login...
Page 39
VDH-GK350A User manual Click to get username list. Click to get a log event of the last 20 events. Click to select language: English, Japanese, and traditional Chinese. ...