Download Print this page

Advertisement

Quick Links

pivot shower
enclosures
with two
in line panels
AA
97444-2-
(-)

Advertisement

loading
Need help?

Need help?

Do you have a question about the Focal 701263 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Kohler Focal 701263

  • Page 1 pivot shower enclosures with two in line panels 97444-2-...
  • Page 2: Basic Tools And Materials Needed

    Kohler plumbing fixtures and fittings are warranted free of manufacturing INSTRUMENTS ON METAL WORK OR GLASS PANELS. defects. Kohler Co. will, at its election, repair, replace, or make appropriate adjustment where Kohler Co. inspection discloses any such defects The use of a squeegee following each shower is occurring in normal usage within one year after installation.
  • Page 3 CAULK AND INSTALL SUB-TRACK Sub-Track (Front Side) Caulk Here If your style requires a sub-track, apply a bead of caulk to the underside of the sub-track as shown. Install the sub-track. 97444-2-...
  • Page 4 INSTALL IN-LINE JAMB/IN-LINE PANEL AND LOCATE BOTTOM TRACK No. 8-18 x 2I Sub-Track Panhead Anchor Screw Bottom Track In-Line Jamb (Front Side) Ledge In-Line Panel In-Line Jamb (Front Side) Place in-line jamb against wall or knee wall. Use a level to plumb jamb and mark hole locations. Drill 3/16 diameter hole(s) and insert anchor(s).
  • Page 5 INSTALL IN-LINE JAMB AND IN-LINE PANEL Anchor No. 8-18 x 2I Panhead Screw Place in-line jamb against wall or knee wall. Use a level to plumb jamb and mark hole locations(s). Drill 3/16 diameter hole(s) and insert anchor(s). Secure the in-line jamb to wall or knee wall with No.
  • Page 6 INSTALL BRACKETS TO “L” Plug JAMB Add caulk in this area and At the top end of “L” jamb, position a insert plug bracket against jamb and align the holes in bracket with the holes in “L” Bracket jamb. Secure with 2 No. 8-32 x 3/4 panhead screws and No.
  • Page 7 INSTALL STRIKE JAMB Fit the strike jamb over the jamb on the strike side of the door opening and align vertically with a level. Strike Jamb Do not secure the strike jamb at this time. INSTALLING BOTTOM TRACK SEAL Bottom Inside of Strike Expander Bracket...
  • Page 8 LOCATING BLOCKS Bracket Strike Expander Jamb Assembly Measure distance between bracket pin at bottom and the edge of strike expander jamb as shown. Slide the block in the top frame of the door panel toward the pivot side frame. Measure Here Handle Pin Hole Measure from the edge of door handle...
  • Page 9 INSTALLING DOOR PANEL Pivot Pin Bracket Bracket Hole Insert a pivot pin into the top bracket Block hole. Hole Lift the door panel and position door handle magnet toward strike jamb magnet. From inside shower, place door panel bottom block’s farthest hole from door handle down over bottom bracket pin.
  • Page 10 INSTALL, DRILL AND SECURE TOP TRACK Top Track 1/4I 1/4I Door Panel No. 8 x 1/2I Panhead Screw Bracket “L” Jamb Inside of Shower NOTE: WEAR SAFETY GLASSES Install top track(s) down over jamb ends. From inside the shower, drill a 1/8 diameter hole through the top track(s) and jambs 1/4 from bottom of leg of top track.
  • Page 11 INSTALLING FLAT SEAL INTO Flat Seal DOOR PANEL PIVOT SIDE FRAME From inside the shower and with the Pivot Side door panel open, slide the flat seal into Frame “T” the “T” shaped slot of door panel pivot Shaped Slot side frame.
  • Page 12 INSTALLING CUSHION INTO A. Fit Handle Cushion DOOR PANEL HANDLE SIDE into the Groove on FRAME One Side B. Push Cushion Fit the door handle cushion into the into Other Groove groove on one side along the length of the door handle side frame as shown. Push the door handle cushion into the other groove along the length of the door handle frame and trim excess...
  • Page 14: Parts List

    PARTS LIST When ordering parts, specify model number, part number, quantity, and color. Key No. Description Qty. Top Track Bottom Track Top/Bottom Frame (Door Section) “L” Jamb Wall Jamb Strike Jamb Handle Side Frame (Door) Top/Bottom Frame (Fixed Panels) In-Line Jamb Side Frame (Fixed Panels) 90 Degree Transition Jamb Return In-Line Jamb...
  • Page 15 97444-2-...
  • Page 16 KOHLER CO., KOHLER, WISCONSIN 53044 E 1999 Kohler Co. 97444-2-...