Safety Instructions For Connecting Electricity - LG S3RERB Owner's Manual

WARNING
For your safety, the information in this manual must be followed to minimize the risk of fire,
explosion, or electric shock, or to prevent property damage, injury to persons, or death.
SAFETY INSTRUCTIONS FOR INSTALLATION
with all governing codes and ordinances.
Follow the details in the installation instructions.
Electric shock can result if the appliance is not
properly grounded.
• Install and store the appliance where it
will not be exposed to temperatures below
freezing or exposed to the weather. Allow the
product to warm to room temperature before
use if it was delivered in winter or at sub-sero
temperature.
• Do not repair or replace any part of the
appliance or attempt any servicing unless
specifically recommended in the user-
maintenance instructions or in published user-
repair instructions that you understand and
have the skills to carry out. Failure to follow this
warning can cause serious injury, fire, electric
shock, or death.
• To reduce the risk of electric shock, do not
install the appliance in humid spaces such as
a bathroom. Failure to follow this warning can
cause death, serious injury, fire, electric shock,
or product deformation or malfunction.
• Remove all packing items and dispose of all
shipping materials properly. Failure to do so can
result in burns, fire, explosion, or death.
• Connect to a properly rated, protected,
SAFETY INSTRUCTIONS FOR CONNECTING ELECTRICITY
y Do not, under any circumstances, cut or
remove the ground prong from the power
cord. To prevent personal injury or damage to
the appliance, the electrical power cord must be
plugged into a properly grounded outlet.
y This appliance must be plugged into a 120-
VAC, 60-Hz grounced outlet protected by
a 15-ampere fuse or circuit breaker. Failure
to follow these instructions can result in fire,
explosion, or death.
y This appliance must be plugged into a
properly grounded outlet. Electrical shock
can result if the appliance is not properly
grounded. Have the wall outlet and circuit
checked by a qualified electrician to make
sure the outlet is properly grounded. Failure
to follow these instructions can create an electric
shock hazard and/or a fire hazard.
y Install the appliance where the plug is easily
accessible. Unplug the appliance when not in
use to avoid risk of fire or electric shock.
y Unplug the appliance before disassembly or
repair to avoid risk of electric shock.
y The appliance should always be plugged into
IMPORTANT SAFETY INSTRUCTIONS
and sized power circuit to avoid electrical
overload. Improper power circuits can melt,
creating electric shock and/or fire hazard.
• If the supply cord is damaged,
it must be replaced by the
manufacturer or its service agents
or similarly qualified person in
order to avoid a hazard.
• Keep all packaging from children. Packaging
material can be dangerous for children. There is
a risk of suffocation.
• Do not install near another heat source such
as a stove, oven or heater. Failure to follow this
warning can cause product deformation, smoke,
or fire.
• Do not place candles, smoking materials,
or other flammables on top of the product.
Dripping wax, smoke, or fire can result.
• Remove all protective vinyl film from the
product. Failure to do so can cause product
damage, smoke, or fire.
• The appliance shall be installed in
accordance with national wiring
regulations
its own individual electrical outlet which has
a voltage rating that matches the rating plate.
This provides the best performance and also
prevents overloading house wiring circuits which
could cause a fire hazard from overheated wires.
y Do not use an extension cord to connect to an
outlet. Doing so could result in a fire or electric
shock.
y Never unplug your appliance by pulling on the
power cord. Always grip the plug firmly and
pull straight out from the outlet. The power
cord can be damaged, resulting in a risk of fire and
electric shock.
y Contact LG or a qualified repair person
immediately to repair or replace all power
cords that have become frayed or otherwise
damaged. Do not use a cord that shows
cracks or abrasion damage along its length or
at either end. The power cord can melt, creating
electric shock and/or fire hazard.
y When installing or moving the appliance, be
careful not to pinch, crush, or damage the
power cord. This will prevent injury and damage
to the appliance from fire and electric shock.
5