Max. Tare Accuracy 3S/NEW SU Pan size 190x230mm 2. WORkING TEMPERATURE: -5~+35 3. STORAGE TEMPERATURE: -25~+50 4. POWER: 6V4.5Ah rechargeable battery 5. NET WEIGHT: 3.6kg/pc 6. DIMENSION: 4pcs/ctn, 580x350x300 Hantverksvägen 15 Tel. +46 (0)176-208920 www.vetek.com Manual_SUP-SS_V1 76493 Väddö, Sverige Email info@vetek.com...
Page 2
9,8,7···1,0, the “zERO” lamp lighting. Now the scale is in a working state. 2.2 Turn off Long- press [OFF] key. 2.3 Auto-off After 10 minutes in zeroing, auto-off. 2.4 Low voltage auto-off When the voltage lower than 5.6V, then power-off. www.vetek.com info@vetek.com...
Page 3
9.1.2 When choose on and press [TARE],now weighing with limit,“ under” lighting, max figure is blinking,press [SET/0~9] once to add 1,press [TARE] to confirm,when finishing auto exit and set “over”.After setting into weighing. 9.1.3 When low limit > high limit, it displays off,then exit. www.vetek.com info@vetek.com...
Page 4
9.7 Change division figure When menu displays d,press [TARE] to enter,press [SET/0~9] to choose division. 9.8 On-rA(choose range of power on) When menu displays On-rA,press [TARE] to enter,press [SET/0~9] to choose 100, 100 is 100% capacity. Press [TARE] to confirm. www.vetek.com info@vetek.com...
Page 5
Push the adjust key to switch off. NOTE: After changed loadcell or PCB, if you need adjust but it shows “Err-0”, it means zero is not in the limited range. Then after power on please press “tare” immediately, it will go into adjusting. www.vetek.com info@vetek.com...
Need help?
Do you have a question about the ACS-3S/NEW SU Series and is the answer not in the manual?
Questions and answers