Features Safety instructions General Safety Instructions The Pall WS10 Series water sensor is an in-line, monitoring • Excessive mechanical loads and incorrect usage solution for measuring dissolved water content in hydraulic, should always be avoided.
PRODUCT DESCRIPTION SPECIFICATION General Measuring Values The Pall WS10 Water sensor was designed for the Humidity Sensor measurement of water content in oil. WS10 is Measuring range: 0...100 % Rh...
WS10 WS10 Series W AT E R S E N S O R s e r v i c e i n s t r u c t i o n s INSTALLATION MAINTENANCE Installation location Sensor cleaning The Water Sensor enclosure is designed in Cleaning of the measuring head is recommended modular form for safe and convenient installation.
WS10C08, WS10B08, WS10C08H, WS10B08H SERIAL NUMBER: SEE NAMEPLATE On behalf of the Pall Europe division of Pall Corporation, we hereby declare that the above product complies with the following transposed harmonised standards: BS EN ISO 14121-1:2007 Safety of Machinery – Risk Assessment EN61326-1: 2006 Electrical equipment for measurement, control and laboratory use –...
TRADEMARKS AND INTELLECTUAL LIABILITY PROPERTY Pall does not accept warranty and liability claims either upon The design of this equipment, software and supporting this publication or in case of improper treatment of the documentation is the intellectual property of Pall Europe Ltd described products.
Page 8
+44 (0)23 9230 2507 Visit us on the Web at www.pall.com Pall Corporation has offices and plants throughout the world. For Pall representatives in your area, please go to www.pall.com/contact Because of technological developments related to the products, systems, and/or services described herein, the data and procedures are subject to change without notice.
Need help?
Do you have a question about the WS10 Series and is the answer not in the manual?
Questions and answers