Table of Contents
Advertisement
5. Do not use the remote control ion hot or humid conditions.
6. Do not disassemble the remote control.
7. Make sure that there are no obstacles between the remote control
and the IR sensor on the DVD player that might obstruct the infra-red
beam
8. The remote control must be held at an angle within 30 degrees
perpendicular to the DVD Player's IR remote control sensor to function
correctly. The distance between the remote control and the sensor
should not exceed 5 meters.
1. Operation
1. Connect the DVD Player to the power supply (100-240V). Red light
will show when power on and charging.
2. Switch the ON button on the machine to turn on the DVD player.
Turn the switch to OFF when not in use.
2. Play / Pause
1. This player will automatically play once the disc is loaded.
2. Press
3. Press
3. Play back from USB/SD/MMC memory card
Press the SD/USB button to play back from USB or memory card.
11
www.PyleUSA.com
BASIC FUNCTION OPERATION
to pause
once more to resume play.
Advertisement
Table of Contents
