Related Manuals for Badeloft WT-01
Summary of Contents for Badeloft WT-01
- Page 1 Wall Mounted Sink Installation Instructions Badeloft ® These installation instructions broadly apply to following models: WT-01, WT-02, WT-03, WT-04, WT-05, WT-06S, WT-06M, WT-06L, WT-06XL, WT-06XXL...
- Page 2 Parts list: Installation Tools: Notes: 1. During Installation please avoid placing tools on the sink basin to avoid damage to the surface. 2. Remove all jewlery as this can also cause damage.
- Page 3 Before you begin please evaluate the material of the wall that this sink basin will be installed on. If this is to be installed on a wall with wooden or metal studs it is imperative that a header board installed for the added support of this wash basin.
- Page 4 If you are mounting a faucet to the basin drill the faucet Draw a center line on the wall in reference to the center holes with a spade bit (35mm) of the sink basin.
- Page 5 Mark the location of the mounting holes on the wall in Mark the height position on the wall. reference to the holes on the basin.
- Page 6 Insert the expansion anchor into the holes and screw the Drill the holes (12mm) lag bolt screws into the expansion anchors.
- Page 7 Slide the washbasin onto the wall brackets and tighten the Attach to wall brackets to the wall. nuts.
- Page 8 Screw the basin onto the wall brackets.