Advertisement
Quick Links
Blood Pressure Arm
USER HELP GUIDE
NO SOUNDS/PULSE:
HEALTHCARE
Check batteries. Make sure
•
batteries are fully charged and
positioned correctly.
We recommend that batteries
•
be removed when not in use.
Check cable connections.
•
Make sure blood pressure cuff
and arm cable are connected to
control box.
Verify control box is on. The
•
control box powers down after
8 minutes if not used.
Check volume setting. Make
•
sure volume on control box/
speaker is turned up.
Advertisement
Related Manuals for Nasco Healthcare Simulaids Life/form LF01095U
Summary of Contents for Nasco Healthcare Simulaids Life/form LF01095U
- Page 1 HEALTHCARE Blood Pressure Arm USER HELP GUIDE NO SOUNDS/PULSE: Check batteries. Make sure • batteries are fully charged and positioned correctly. We recommend that batteries • be removed when not in use. Check cable connections. • Make sure blood pressure cuff and arm cable are connected to control box.
- Page 2 Applying too much pressure • to pulse. The pulse is delicate and should be palpated lightly. Pressing too hard can damage the pulse, causing the feature to stop working. Verify palpation mode is set • to “Pulse On.” If control box is set to pulseless, all blood pres- sure sounds are disabled.