Advertisement
Solar Cockroach
SUPPLIES:
2V Solar Cell
Vibrating Motor
2 Big Paper Clips
2 Googly Eyes
6 inches of
Magnet Wire
Make sure to warm up your Soldering Iron and Glue Gun before you start.
1
SOLDER YOUR MOTOR to THE SOL AR PANEL
Peel off the adhesive backing from the motor. Align the wires from the motor with the leads
on the solar cell and stick the motor on to the cell. Solder the wires to leads.
Please visit www.BrownDogGadgets.com for more great ideas & info.
TOOLS:
Solder
Soldering Iron
Hot Glue Gun
Wire Cutters
TIME:
15-30 MINUTES
YOU WILL NEED:
2AWA
5504
Advertisement
Table of Contents
Summary of Contents for SPECTRUM Nasco Solar Cockroach
- Page 1 Solar Cockroach TIME: 15-30 MINUTES YOU WILL NEED: TOOLS: SUPPLIES: Solder 2V Solar Cell Vibrating Motor Soldering Iron 2 Big Paper Clips Hot Glue Gun 2 Googly Eyes Wire Cutters 6 inches of Magnet Wire Make sure to warm up your Soldering Iron and Glue Gun before you start.
- Page 2 CUT PAPER CLIPS FOR THE LEGS& ATTACH Cut paper clips as shown in the diagram. Bend the U-shapes outward before attaching the legs. Put a blob of hot glue on the bottom of the solar cell to attach the legs. Hold the legs in place while the glue cools and hardens.
Need help?
Do you have a question about the Solar Cockroach and is the answer not in the manual?
Questions and answers