Advertisement
Quick Links
Safety in Action
Fig. 3
E Storage
As the design of the runner is simple and without any movable parts, it can remain in the
system without any problems.
F Care
Before inserting the runner or attaching the lanyard in the eyelet it must already be
ascertained that the polyamide semi-circles (1.3) are not worn out. Also, if the runner
remains in the system, this must be checked.
12
Sperian Fall Protection Deutschland GmbH & Co. KG, D-95015 Hof-Bayern, Postfach 16 46, Telefon +49/92 81/3 02-0, Telefax +49/92 81/36 26, soell@sperianprotection.com, www.fall-protection.com
Safety in Action
Instruction for use and maintenance
Anchorage Device „Söll-MultiRail"
horizontal
closed glider complying with DIN EN 795
Part-No. 17407
Serial number:
Year of manufacture
:
(The following must be completed by the operator in permanent waterproof ink.)
Date of initial operation:
Operator/user:
Street:
Place:
Phone:
Issue: 04.08.2009
SE 26
Sperian Fall Protection Deutschland GmbH & Co. KG, D-95015 Hof-Bayern, Postfach 16 46, Telefon +49/92 81/3 02-0, Telefax +49/92 81/36 26, soell@sperianprotection.com, www.fall-protection.com
Date of
purchase:
Fax:
Advertisement
Subscribe to Our Youtube Channel
Summary of Contents for Miller 17407
- Page 1 Safety in Action Fig. 3 Instruction for use and maintenance Anchorage Device „Söll-MultiRail“ horizontal closed glider complying with DIN EN 795 Part-No. 17407 Serial number: E Storage Date of Year of manufacture purchase: As the design of the runner is simple and without any movable parts, it can remain in the (The following must be completed by the operator in permanent waterproof ink.)
- Page 2 Safety in Action Safety in Action Further remarks Table of content Page A Safety precautions B Checking before use C Using the runner D Maintenance E Storage F Care These instructions are protected by copyright! They may not be reproduced and distributed in any ways/ by any means without prior written consent of the author according to Articles 16 and 17 of the German Copyright Act.
- Page 3 Safety in Action Safety in Action Further remarks A Safety precautions A 1. These instructions must be brought to the attention of any person using the „Söll-MultiRail“ system before he begins to use the system. Actions contravening these instructions may endanger the safety of the User! A 2.
- Page 4 Safety in Action Safety in Action B Checking before use B 1. Ensure that the runner, safety harness, lanyard with a DIN EN 355 compliant fall arrestor, a fall arrestor or a travelling safety device as well as guide rails (= anchorage device) are in the flawless working condition and are functioning properly before and during their every use.
- Page 5 Safety in Action Safety in Action If using: D Maintenance • a safety rope with EN 355 fall arrester, attach this to the back eyelet of the safety harness in accordance with the instructions. Important! D 1. The regular maintenance of the "Söll-MultiRail runner" are to be performed considering the The fall arrester must always be on the body side! legal regulations, the conditions of use and environmental conditions.
- Page 6 Safety in Action Safety in Action 1. Alternative 2. Alternative Use: Fixed end stop (Part-No. 17404) Use: Rail end stop with exit (Part-No. 23956) Fig. 1 Fig. 2 Remove the stop plate (4.1) by detaching the screw (4.2). Insert the runner (1.0) into the guide Press the unlocking plate (5.1) downwards with one hand and place the runner (1.0) onto the rail „Söll-MultiRail“...
Need help?
Do you have a question about the 17407 and is the answer not in the manual?
Questions and answers