Philips Norelco G270/60 User Manual page 10

Defining Beard, Moustache and
Sideburns
1 Be certain the Groomer is in the OFF position.
2 Remove the AccuControl comb attachment
by pressing and sliding the Hair Length
Selector upwards (fig. 9).
3 Detach the full width trimmer attachment by
pushing the release button (fig. 10).
4 Put the smaller neckline and sideburn
trimmer attachment on the Groomer (fig. 11).
You will hear a click.
◗
Hold the Groomer upright when you use the
smaller neckline and sideburn trimmer
attachment (fig. 12).
Using Nose, Ear & Eyebrow
Attachment
1 Be certain the Groomer is in the OFF
position.
2 To attach or remove nose, ear, eyebrow
attachment (or change attachments):
◗
Remove the AccuControl comb attachment
(fig. 9).
◗
Remove the full width trimmer attachment by
pushing the release button (fig. 10).
◗
Put the nose, ear, eyebrow attachment on the
Groomer (fig. 13).You will hear a click.
Trimming Nose Hair
◗
Make sure nasal passages are clean.
1 Place nose, ear and eyebrow attachment on
Groomer.
2 Switch the Groomer ON and insert the tip
of the attachment into one nostil (fig. 14).
CAUTION: Do Not insert the tip more
than 3/16 in./5mm into your nostril.
3 Slowly move the tip in and out while turning
it around at the same time in order to
remove unwanted hair. For best results, make
sure the side of the tip is firm against skin.
This will reduce the tickling effect that can
occur during trimming of nose hair.
4 Turn off Groomer. Wipe attachment clean
after each use.