Advertisement
Quick Links
Advertisement
Summary of Contents for Jet 310016
- Page 1 OPERATION MANUAL INFRARED THERMOMETER 310016 310018 www.jetequipment.com...
-
Page 2: Field Of View
Field of view: The meter’s field of view is 8:1 (310016) and 12:1 (310018), meaning that if the meter is 8" (310016) or 12" (in case of 310018) away from the target, the diameter of the object under test must be at-least 1". -
Page 3: General Specifications
General Specifications: 310016 310018 Display 3-1/2 digit (1999 count) LCD with backlighting 3-1/2 digit (1999 count) LCD with backlighting Measuring range -20°C to 450°C / -4°F to 842°F -50°C to 750°C / -58°F to 1382°F Resolution 1°C / °F 0.1°C / °F up to 200°C / °F 1°C / °F over 200°C / °F... -
Page 4: Measurement Operation
Measurement Operation: (1) Hold the meter and point it towards the surface to be measured. (2) Press and hold the Measurement Trigger to turn the meter ON. LCD will show a reading. If there is NO display or reading, the battery may have depleted. Replace the battery and try again. (3) Push the Laser select button while pressing and holding the Measurement Trigger to turn ON the laser beam. -
Page 5: Distance & Spot Size
Distance & Spot Size As the distance (D) from the object increases, the spot size (S) of the area measured by meter becomes larger (see fig. 1 & 2). Locating a Hot Spot To find a hot spot, aim the meter outside the area of interest, then scan across with an up and down motion until you locate hot spot.