Related Manuals for Pacific Bay CASCADIA
Summary of Contents for Pacific Bay CASCADIA
- Page 1 INSTALLATION GUIDE CASCADIA SMART TOILET SEAT Soft Close Lid, Cold/Warm Water Wash With Side Control Panel PB-TS04...
- Page 2 BEFORE USE • Before use, please read this installation guide to ensure you use the product correctly. Pay special attention to the “Safety Precautions” section, making sure you have read it thoroughly before you use the product so that you can safely operate everything.
-
Page 3: Table Of Contents
TABLE OF CONTENTS Before Installation ............1 Parts in Packaging . -
Page 4: Before Installation
BEFORE INSTALLATION • Do not connect the toilet with electricity and water before finishing the installation completely. • Do not install the mounting plate on the main unit and connect the product to electricity before installing the main unit on the ceramic body. The warm water groove is still empty at that time, and if connected to the heater, it might cause malfunction. -
Page 5: Product Specifications
PRODUCT SPECIFICATIONS INSTALLING YOUR SMART TOILET SEAT Remove Current Toilet Seat and Prepare Toilet for Installation Remove the previously installed toilet seat by loosening the bolts and dismantling. Once done, clean the toilet in preparation for the new Smart Toilet Seat. - 2 -... - Page 6 Install Rubber Anchors The mounting plate for your Smart Toilet Seat comes disassembled. To start, take the rubber anchors and insert them into the mounting holes on your toilet by forcing the knob on the anchor down through the holes making sure the flared end is flush against the top of the toilet base. Note: You may use a screw driver to push on and wet the surface of the rubber anchor to make installation easier.
- Page 7 Attach Smart Toilet Seat Once you’ve installed the mounting plate you are ready to attach the Smart Toilet Seat. To do so, simply slide the Smart Toilet Seat onto the mounting plate until you hear a click. Note: If the toilet Seat is positioned improperly you can easily remove it by pressing and holding the uninstallation button of the toilet found on the right side and sliding it off of the toilet.
-
Page 8: Testing Your Smart Toilet Seat
Once the T-Cock is installed, and before you turn the water back on, you must install the water line going from the T-Cock to the Smart Toilet Seat. Take the two hoses that came in the packaging and connect them to either side of the filter making sure the rubber washer is properly in place in the water filter intake. -
Page 9: Cleaning The Water Filter
When first using your Smart Toilet Seat: • Insert the power plug into the socket. Your Smart Toilet Seat’s spray nozzle should extend and retract initially as part of the system testing phase. • Make sure that the power indicator light is on before testing the product. The power light will indicate when the power is on, and the toilet won’t respond even if it’s connected to electricity when the power indicator light is off. - Page 10 It is important that you clean your filter regularly. Failure to do so may result in lowered water pressure due to blockages of dirt in the filter. To clean the water filter: Turn off the water valve supplying the toilet and seat Press the [NOZZLE CLEANING] button.
-
Page 11: Getting Power To Your Smart Toilet Seat
CAUTIONS: • Back-flush or change the filter if you find that the water pressure has fallen significantly. • Filter can be easily damaged, and so it is therefore not guaranteed as part of the warranty. GETTING POWER TO YOUR SMART TOILET SEAT - 8 -... -
Page 12: Product Model And Parameters
The typical bathroom doesn’t have an outlet in close proximity to the toilet. To solve this issue, you can have an electrician come and install an outlet near your toilet in the bathroom. This will enable you to power your Smart Toilet Seat without using an extension cord or other method. - Page 13 Input Water Type Pipe Directly Rated Power Supply Alternating Current (AC) 110V 60Hz Rated Power 430W Standard Daily Power 0.5kWh Consumption Temperature Adjustment Range 86-104°F (Automatic Power Surface Temperature Saving at About 79°F) Heated Seat Heater Power Thermal Fuse Safety Device Catalyst and Absorption Dually Mode Deodorizing...
-
Page 14: Safety Precautions
Temperature Adjustment Range 86-104°F Water Temperature Maximum: 650W Heater Power 0.32 Gallons Tank Capacity Power leakage protection, thermal fuse, over-heating Safety Device protection, dry heating prevention Backflow Reflux Valve Prevention Device 18.36 ft /min Drying Airflow Temperature Adjustment Range Around 95-138°F Regulation Drying Device 350W... - Page 15 Please carefully read the following safety precautions to ensure you use the product correctly. The precautions listed here are important security-related concerns that must be followed. Annotation and meanings are described below: If Ignored, May Cause Personal Injury or Property Damage CAUTION Mandatory Steps MUST COMPLY WITH...
- Page 16 1. Must comply with installation and use instructions. Caution 1. If you do not operate this product in accordance to the following, it may cause a fire or electric shock: o This product requires electricity to function properly, so do not install it in a place that it may get wet easily.
- Page 17 3. If you do not use the tank containing products for an extended period of time, close the inlet valve and release the water stored in the product. Once done, remove power to the product. The next time you use the product, run water through the product thoroughly before use.
-
Page 18: Cautions Before Installation
7. Unplug the power cord and close the inlet valve when you encounter the following situations: o Leaks from piping and/or inside the product o Abnormal heat o Abnormal sounds or smells o Cracks in the product o Smoke is coming from the toilet 8. -
Page 19: Function Of Side Switches
FUNCTIONS OF SIDE SWITCHES - 16 -... -
Page 20: Preparation Before Use
PREPARATIONS BEFORE USE - 17 -... -
Page 21: Using Your Smart Toilet Seat
Preparation 1. Confirm that the power plug is inserted into the plug socket firmly. 2. Once confirmed, turn on the water valve. Troubleshooting 1. If [POWER] light on side panel is still off, all functions cannot be used. 2. Please press the [RESET] button on the plug. (Indicator light will turn on). USING YOUR SMART TOILET SEAT 1. - Page 22 Clean and maintain the toilet as directed below to extend its life: Safety Power Plug • Do not sprinkle water or cleaners on the main unit and/or plug, or it may cause electric shock and fire • Do not use improper cleaners on the plastic parts (e.g., toilet chemicals, household detergents, bleach, benzene, paint thinner, WARNING decontamination powder, or cresol)
-
Page 23: Routine Maintenance
Main Unit, Toilet Seat, Cleaners, Nylon Brush, Dry Cloth, Toilet Paper Surface Cover High-Acid Detergents, Strong Alkaline Detergents, Ceramic Body Detergents that Contain Abradants, Metal Brush, or Nylon Brush Brush, Nylon Brush, Cleansers, Abrasive Powders, Water Valve Detergents that Contain Coarse Particles, Chlorine Detergents, Strong Alkaline liquids Basic Tools for Routine Maintenance Soft Cloth... - Page 24 • Cleaning and maintenance of toilet cover, seat and external plastic components 1 Wipe with a soft cloth o Wring dry a water-wet soft cloth, then wipe the product 2 When particularly dirty o Wipe using the soft cloth with a diluted neutral detergent for the toilet, and then clean with fresh water 3 When there is detergent residue...
-
Page 25: Deciphering Your Smart Toilet Seats Various Beeps
2 Pull out the deodorizing box 3 Insert a new deodorizer box into the mounting port and replace vent cover. Note: The deodorizer box can be easily damaged, and so it is not guaranteed as part of the warranty. • Maintenance of metal filtration device o Please clean the metal filtration device when the water flow is weak o Please clean with water and not detergents o Avoid pinching the water filter... -
Page 26: Troubleshooting
When pressing a button on the side control panel the system will make a noise after the signal has been received. There are three types of noises you will hear from your Smart Toilet Seat: • “Beep” – Your Smart Toilet Seat has received a signal •... - Page 27 Please check the following before calling for servicing: Problem Possible Cause Solution The power or the circuit breakout is Wait until the power is restored, or turn the circuit breaker back on Completely Fails to Operate The power light on the main unit is Press [stop] on the control panel Push the [Stop] button and wait until the main water The water supply is cut off...
- Page 28 The dryer will stop automatically about 5 minutes after [DRYER] Press [DRYER] button again button is pressed Dryer Turns Off While in Use The seat sensor isn’t working Refer to the “Seat Sensor” instructions properly Water Flows Out Wand cleaning function; system After Wand ______________ operating normally...
- Page 29 Pressing the Buttons Runs the Rear Cleansing The sitting sensor is detecting and Deodorizer Please keep the sensor uncovered and remove something else on the toilet Runs Even debris, drops or dust incorrectly Though no one is Seated on the Toilet The Rear Cleansing and...
-
Page 30: Warranty
Pacific Bay’s obligations under this warranty are limited to repair, replacement, or any other appropriate adjustment, at Pacific Bay’s option, of the smart toilet seat or parts found to be defective in normal use, provided that such products are properly installed, used and serviced in accordance with instructions. - Page 31 - 28 -...