Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for ANTTI E-series
- Page 1 Installation instructions Shutter plate, operated by linear actuator Elevators E-series 408012 (en) ANTTI-TEOLLISUUS OY Koskentie 89 FIN25340 Kanunki, Salo Tel. +358 2 774 4700 Fax +358 2 774 4777 E-mail: antti@antti-teollisuus.fi 06-2018 www.antti-teollisuus.fi...
-
Page 3: Table Of Contents
Contents SHUTTER PLATE, OPERATED BY LINEAR ACTUATOR ..................4 Contents of the package............................5 Installation in the E-series elevator......................... 6 Attachment of the frame plate (E-model)........................ 7 Attachment of the draw support..........................8 Supporting the linear actuatorrod ........................... 8 Cutting and attachment of shutter plate rods......................9 Connecting the cables to the linear motor ...................... -
Page 4: Shutter Plate, Operated By Linear Actuator
SHUTTER PLATE, OPERATED BY LINEAR ACTUATOR The shutter plate package includes the required fittings for installation in the E-elevators. The electric connections shall be made in accordance with the documentation, included in the delivery. Content of package (32828) Antti-Teollisuus Oy 408012 06-2018... -
Page 5: Contents Of The Package
Nut M12 102240 Hexagon screw M10x100 110560 Nut M10 300368 Linear actuator 119020 Conductor strap 3,6X203 111511 Washer M8 300295 Limit switch capacitive KI-2015-ABOA KI-0016 A73373 SENSOR BRACKET D30 100X100 107700 SELF-TAPPING SCEW 4 2X13 408012 Manual Antti-Teollisuus Oy 408012 06-2018... -
Page 6: Installation In The E-Series Elevator
Installation in the E-series elevator Fig. 1. Installation in elevator E 3pcs at regular distances NOTE! THE SHUTTER PLATE EDGE POINTS AWAY FROM THE ELEVATOR PIPES Antti-Teollisuus Oy 408012 06-2018... -
Page 7: Attachment Of The Frame Plate (E-Model)
See “Supporting the linear actuator rod”on the next page. Fig. 2. Attachment of the frame plate to the elevator pipe. Cover plate of elevator pipe Side plate of elevator pipe Frame plate Fixing points 13. Hexagon screw M8x30 14. Nut M8 Antti-Teollisuus Oy 408012 06-2018... -
Page 8: Attachment Of The Draw Support
It must turn easily. 1. Frame plate 5. Support against buckling (2pcs.) 19. Hexagon screw M10x100 (2pcs.) 20. Nut M10 (6pcs.) Linear actuator rod Fig. 4. Supporting the linear actuator rod. (Fig. 1, detail DET1) Antti-Teollisuus Oy 408012 06-2018... -
Page 9: Cutting And Attachment Of Shutter Plate Rods
(Fig. 6). Fig. 6. Attachment to the actuator. Fig 7. Guides 7. Guide 8. Intermediate rod bracket 9. Shutter plate rod 16. Hexagon screw M12x50 17. Nut M12 Antti-Teollisuus Oy 408012 06-2018... - Page 10 The low- est limit switch must be correctly positioned in particular in the vertical direction so that in their lowest position the springs will be compressed by a few millimeters, but not completely tight. Antti-Teollisuus Oy 408012 06-2018...
-
Page 11: Connecting The Cables To The Linear Motor
After the connection fi x the conductors withstraps (part 22) to the linear actuator rod. The electric connections shall be made in accordance with the documentation included in the delivery. Fig. 9. Cables Antti-Teollisuus Oy 408012 06-2018... -
Page 12: Location Of Sensors
LOCATION OF SENSORS EXAMPLE: Antti-Teollisuus Oy 408012 06-2018... - Page 13 Use self-tapping screws for fixing the installation plate to the top section plate. The hole does not have to be round. Installing the sensor so that its tip will project about 5 mm above the attachment nut. Antti-Teollisuus Oy 408012 06-2018...
-
Page 14: Guarantee Terms
GUARANTEE TERMS Antti-Teollisuus Oy grants a guarantee on the products the company has manufactured, subject to the following terms: 1. The period of guarantee is one year, which starts on the date of delivery from the factory; however, it must include at least one harvest season. -
Page 15: Eu- Declaration Of Conformity
EU- Declaration of Conformity ANTTI-TEOLLISUUS OY Koskentie 89 FIN25340 KANUNKI, Finland Tel. +358 2 7744700 Fax +358 27744777 declares that SHUTTER PLATE, OPERATED BY LINEAR ACTUATOR conforms with the provisions of the following directives: Machine Directive 2006/42/EC Electro-Magnetic Compatibility Directive (EMC) 2004/108/EC Kuusjoki 12.06.2018...
Need help?
Do you have a question about the E-series and is the answer not in the manual?
Questions and answers