Page 3
Important Safeguards Polarized Plug (cont’d) 15. Do NOT disassemble unit or attempt to make any repairs yourself. Incorrect Do not attempt to modify the plug in any way. assembly or repair could result in risk of fire, electric shock or injury to persons when operating.
Page 4
Parts & Features Assembly and Use 1. Set the press on a flat, level heat-resistant surface. 2. Turn the Locking Knob dial to “unlock” and lift the Pressing Handle to open the press. The press will automatically stay in lifted position. 3.
Page 5
Assembly and Use Assembly and Use (cont’d) (cont’d) 6. The Green Ready Light will illuminate once the press has reached the desired E2. A warning beep will signal if the Pressing Plate is left in a lifted position without temperature and is ready for you to start pressing. Be sure to use the provided use for approximately 10 minutes.
Page 6
Assembly and Use Assembly and Use (cont’d) (cont’d) Pants: Shirts & Blouses (continued): Waistband Collar • Place the top of pants on the press. Press the Pressing Board down over the • Place the collar on the board, spray and press. Fold the collar in half, spray and pants to the Ironing Board.
Storage & Maintenance Troubleshooting CAUTION: Prior to storing or maintaining your steam press, isolate the unit by re- Prior to using or maintaining your steam press, isolate the unit by removing the moving the cord from the electrical outlet and avoid immersing the unit in water. cord from the electrical outlet.
Page 8
Please send returns to: Within this warranty period, Montgomery Ward will repair or Montgomery Ward, Inc. replace, at its option, defective parts of this...
Need help?
Do you have a question about the WSP-1202 and is the answer not in the manual?
Questions and answers