Table of Contents
Advertisement
Quick Links
alfa-sys ag
Taper cleaning device alfa-cleaner
Drive unit / cleaning attachments / spare brushes
Designation
Types:
Manufacturer:
Version 1
alfa-cleaner taper cleaning device
Instruction Manual
Translation of the Original Instruction Manual
Example: Drive unit with SK 50 cleaning attachment
alfa-cleaner
Drive unit
Cleaning attachments SK / DIN / MAS-BT / CAT
Cleaning attachments HSK
Cleaning attachments PSC
Spare brushes
alfa-sys ag, Industriestrasse 56, LI-9491 Ruggell
Telephone: +423 377 56 17 , E-mail: info@alfa-sys.com
Keep for future use!
Page 1/9
Advertisement
Table of Contents
Summary of Contents for alfa-sys Drive unit
- Page 1 Instruction Manual Translation of the Original Instruction Manual Taper cleaning device alfa-cleaner Drive unit / cleaning attachments / spare brushes Example: Drive unit with SK 50 cleaning attachment Designation alfa-cleaner Types: Drive unit Cleaning attachments SK / DIN / MAS-BT / CAT...
-
Page 2: Table Of Contents
TABLE OF CONTENTS General .................................3 Introduction .............................3 Intended use ............................3 Reasonable predictable incorrect use .....................3 Safety information ............................4 General safety information regarding residual risks ................4 Special safety information ........................5 Operator’s obligation ..........................5 Staff’s obligation ............................6 Description of the devices ..........................7... -
Page 3: General
In the event of unauthorized conversions and changes to the device, all manufacturer liability and warranty becomes null and void. All changes to the system require agreement and control by alfa-sys ag. The device always has to be operated with the supplied original power supply! Spare parts, wear and tear parts and auxiliary material: The use of spare parts and wear parts from third-party manufacturers can lead to risks. -
Page 4: Safety Information
2 Safety information General safety information regarding residual risks The following general risks exist and must be observed during use. Two pictograms on the device (warning signal and command signal) also warn against residual risks... -
Page 5: Special Safety Information
Special safety information The drive unit must not be switched on when inserting ! PROHIBITION Caution finger injury ! Never reach into the rotating brushes from above! The rotating brushes can cause severe finger injury by pulling in! This symbol is attached to the cleaning device. -
Page 6: Staff's Obligation
Staff’s obligation Only correspondingly qualified staff may work with these devices. Qualified staff is defined as being those persons who, due to their education, experience and instruction, are entitled to execute the work required. Here, you must be able to recognize and avoid possible dangers. -
Page 7: Description Of The Devices
4 Use of the devices 1. First connect the mains power unit supplied to the drive unit (24VDC) and then connect to the mains power (100-240VAC). Please pull back the plug sleeve to release the 24V plug (safety coupling) 2. -
Page 8: Attachment
6 Attachment Spare brushes and reductions Ersatzbürsten spare brushes 350130-B SK 30 DIN 69871/MAS-BT/CAT ab Lager/on stock ab Lager/ 350140-B SK 40 DIN 69871/MAS-BT/CAT on stock ab Lager/ 350150-B SK 50 DIN 69871/MAS-BT/CAT on stock... -
Page 9: Declaration Of Conformity
Declaration of Conformity EG/EC/CE KONFORMITÄTSERKLÄRUNG DECLARATION OF CONFORMITY DÉCLARATION DE CONFORMITÉ alfa-sys ag Nous (Name des Anbieters) (supplier’s name) (nom du fournisseur) Industriestrasse 56 2210, FL-9491 Ruggell (Anschrift) (address) (adresse) erklären in alleiniger Verantwortung, dass das Produkt declare under our sole responsibility that the product déclarons sous notre seule responsabilité...
Need help?
Do you have a question about the Drive unit and is the answer not in the manual?
Questions and answers