Completing A Wash Cycle - EdgeStar BIDW1802SS Owner's Manual

4. Refill the rinse aid when the Status Display shows the "LSb" error code. Your dishwasher will
run with low or no rinse aid, but your rinsing and drying results will suffer.
Note:
 Only use branded rinse aid, such as Jet-Dry, for the dishwasher.
 Never fill the rinse aid dispenser with any other substances or detergents.

Completing a Wash Cycle

When the selected wash cycle has finished, the Status Display will read END, or -:-- if it has been
canceled. Open the door carefully and wait a few minutes before unloading the dishwasher to avoid
handling the dishes and utensils while they are still hot. This will also assist in the drying process. It is
normal for the dishwasher to be wet inside.
14