Phil & Teds HD4718 User Manual page 10

EnglisH
10
Problem
The keep-warm light
does not go on when
the cooking process is
finished.
The rice is not
cooked.
The rice is too hard
or too soft.
The rice is scorched.
The rice cooker does
not automatically
switch to the keep-
warm mode.
The food has not
been steamed
properly.
Cause
The light is defective.
Not enough water has
been added.
The cooking process has
not started.
The inner pot is not
properly in contact with
the heating element.
The heating element is
damaged.
Not enough or too much
water has been added.
The rice has not been
rinsed well.
The temperature control
is defective.
There is too much food
in the steam tray.
Solution
Take the appliance to your Philips dealer or a
service centre authorised by Philips.
Add water according to the scale on the
inside of the inner pot (see chapter 'Using
the appliance').
You have failed to press down the control
lever.
Make sure that there is no foreign residue on
the heating element.
Take the appliance to your Philips dealer or a
service centre authorised by Philips.
Add water according to the scale on the
inside of the inner pot (see chapter 'Using
the appliance').
Rinse the rice until water runs clear.
Take the appliance to your Philips dealer or a
service centre authorised by Philips.
Distribute the food evenly and do not steam
too much food at one time.