Summary of Contents for Bai cells EG7035
- Page 1 BaiCells EG7035 User Manual V1.0 All rights reserved © BaiCells Technologies Co., Ltd.
- Page 2 About This Document This document introduces the specifications of BaiCells EG7035 CPE and guides users to install and configure it. Copyright Notice BaiCells copyrights this specification. No part of this specification may be reproduced in any form or means, without the prior written consent of BaiCells.
-
Page 3: Table Of Contents
Contents Product Overview ....................... 1 Introduction ......................1 Features ........................1 Product Description....................2 Appearance ....................... 2 Interface and Button ....................3 LED Indicators ......................3 Technical Specifications ....................4 Basic Specification ....................4 RF Specification ......................4 SW Specification ....................... 4 Device Management .................... - Page 4 The POWER indicator does not turn on..............14 Fails to Login to the web management page............14 The CPE fails to search for the wireless network............. 14 The power adapter of the CPE is overheated............14 The parameters are restored to default values.
- Page 5 Contents of Figure Figure 1-1 EG7035 Appearance .................. 2 Figure 1-2 Interface and Button of EG7035 ..............3 Figure 3-1 Install the Sample ..................8 Figure 3-2 Connection Diagram ..................8 Figure 4-1 Login Page ....................9 Figure 4-2 Setup Network Mod .................. 10 Figure 4-3 LTE Setting ....................
- Page 6 Contents of Table Table 1-1 EG7035 Product Description ................ 2 Table 1-2 EG7035 Appearance Index ................2 Table 1-3 Description of EG7035 Interface and Button ..........3 Table 1-4 LED Indicators ....................3 Table 2-1 Basic Specification ..................4 Table 2-2 RF Specification ................... 4 Table 2-3 SW Specification ..................
-
Page 7: Product Overview
WBB services. Features EG7035 is designed according to the simplicity principle, which can evolve in a short period and realize fast customization, delivery and deployment as well. The main features of EG7035 is as follows: ... -
Page 8: Product Description
Table 1-1 EG7035 Product Description Product Description EG7035 3.65G LTE Customer Premise Equipment Appearance The appearance of EG7035 is shown in Figure 1-1, and is described in Table 1-2. Figure 1-1 EG7035 Appearance Table 1-2 EG7035 Appearance Index Index Description Dimension... -
Page 9: Interface And Button
Interface and Button The interface of EG7035 is shown in Figure 1-2, and is described in Table 1-3. Figure 1-2 Interface and Button of EG7035 Table 1-3 Description of EG7035 Interface and Button Connectors Description ETH RJ45 One LAN USIM Slot Support 1.8V/3.0V USIM... -
Page 10: Technical Specifications
2. Technical Specifications Basic Specification Table 2-1 Basic Specification Specification Description Comment LTE Standard 3GPP Release 9 None Ethernet LAN One RJ-45 port 10/100 None Port auto-sensing, auto-MDX, 12V ~ 24V PoE LED Indicators Power/LET Signal/LAN Indicator None USIM Support 1.8V/3.3V 2FF USIM None Restore Button Tact Button... -
Page 11: Device Management
PIN Management SIM Lock Network Connection Create, delete, and edit APNs setup Set up dial-up connection automatically Set up dial-up connection manual LTE Scan Mode Full Band Cell Lock Band / Frequency Preferred ... -
Page 12: Regulatory Compliance
Table 2-5 Environment Specification Feature Capability Operating Temperature -40℃ ~ 55℃ Storage Temperature -40℃ ~ 70℃ Operating Humidity 5% ~ 95% Drop 0.8m Protected Level IP67 Regulatory Compliance FCC Compliance This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. - Page 13 Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Warning This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
-
Page 14: Product Installation
3. Product Installation Installation Steps 1. Assemble waterproof parts. Plug cable local connection, as shown in Figure 3-1 2. Open the waterproof cover, and according to the instructions on the SIM card. 3. Connected to the adapter, Pay attention to the adapter interface identify. Install the Sample Figure 3-1 4. -
Page 15: Cpe Configuration
4. CPE Configuration Log in By using a Web browser to login the CPE management page, the CPE configuration management. Log on to the Web management page steps are as follows: 1. Power on. 2. In the address column of browser, type in http://192.168.1.1, then press “Enter”, login in page is shown in Figure 4-1 Figure 4-1 Login Page... -
Page 16: Lte Setting
Figure 4-2 Setup Network Mod 4.2.2 LTE Setting To set the LTE Network, perform the following steps: 1. Choose Network Setting>LTE Setting. 2. In the LTE Setting area, you can configure the LTE network. 3. In the LTE Setting area, you can also view the network information such as frequency, DL&UL MCS, RSRP, RSRQ, CINR, SINR, Tx Power, Cell ID, PCI, MCC and MNC. -
Page 17: Setting Connect Method
4.2.3 Setting Connect Method To set the LTE network connect method, perform the following steps: 1. Choose Network Setting>LTE Setting. 2. In the LTE Setting area, you can set the connect method. 3. There are two methods to connect the LTE network, it is needed to choose a method between Auto and Manual, if you want to auto connect to the LET network you should choose the Auto, otherwise you should choose Manual. -
Page 18: Setting Scan Mode
4.2.5 Setting Scan Mode To set the LTE network scan mode, perform the following steps: 1. Choose Network Setting>LTE Setting. 2. In the LTE setting area, you can set the scan mode. 3. You can choose full Band, PCI Lock, or a band the CPE supported. Figure 4-5 Setup Scan Mode 4.2.6 Setting Frequency (Earfcn) -
Page 19: Apn Management
Figure 4-6 Setting frequency 4.2.7 APN Management 1. To set and manage APN, perform the following steps: 2. Choose Network Setting>APN Management. 3. In the APN Management area, you can set the APN. 4. Choose an APN number which you want to set. 5. -
Page 20: Appendix Afaqs
Appendix A FAQs A.1 The POWER indicator does not turn on. Make sure that the power cable is connected properly and the CPE is powered on. Make sure that the power adapter is compatible with the CPE. A.2 Fails to Login to the web management page. ... - Page 21 Appendix B Product List Index Content Picture Amount EG7035 CPE 12V/1A adapter PoE Combiner Mounting bracket User Manual...
- Page 22 BaiCells EG7035 Bracket Installation Guide V1.0 All rights reserved © BaiCells Technologies Co., Ltd.
- Page 23 Assemble Bracket Assemble Bracket Install bracket and screw on, do Install ground wire and not tighten the screws. lock the screw. Tighten four screws using allen Put U shape screw on bracket of lock wall and install it on CPE hexagon wrench.
- Page 24 Install on Pole Install on Pole Loop U shape screw on pole Tighten U shape screw nut and put on pole bracket. using wrench. Adjust CPE to a suitble position. Tighten four screws.
Need help?
Do you have a question about the EG7035 and is the answer not in the manual?
Questions and answers