Litelume Econolume Series Installation Instructions

Strip Linear
Econolume Series (8ft)
Installation Instructions
Warning
1. To avoid electric shock, disconnect power at source prior to installation.
2. The installation should be performed by qualified electricians or lighting technicians.
3. Before conducting any installation, maintenance, or removal, disable all power to the luminaries and wait until the fixture cool
down.
4. Do not touch the fixture while it is in service.
5. If there is any problem with the fixture, DO turn off power and DO NOT attempt repair unless you are a qualified technician or
the customer service member.
Surface Mount Installation
1. Unscrew the 4pcs screws on the back box of the luminaire or the luminaire base.
2. Disconnect the wire plug to start installation.
www.litelume.com
info@litelume.com
©Lite Lume Corporation 2018
833.LED.LUME
Lensand Metal Lens
Frame Assembly
Page 1/4 LITELUME™ seeks to deliver the most advanced and efficient LED technology. Due to
technology progression, specifications may change. We reserve the right to update product
Rev Date: 08/23/2018 specifications without notice. Contact LITELUME™ for the most up-to-date data.
Luminaire Base
Screw(4Pcs)
Luminaire Base
Plug