Sony VPCCW Series Replacement Instructions

These easy instructions are intended to guide you through the replacement process.
Before you begin, place your notebook computer on a clean or covered surface to avoid
damage to the computer's case.*
Follow the ESD (Electrostatic Discharge) damage prevention instructions:
o Hold parts by the edges, away from exposed circuitry when possible.
o Do not walk around excessively as this promotes static build-up.
Remove jewelry before you begin work to avoid scratching the surface of your notebook
computer.*
The appearance of the electronic components shown in the illustrations may be different from
the components shipped. This slight difference does not affect the accuracy of these
instructions.
* Sony is not responsible for damage caused by incorrect handling of the notebook computer.
Step 1. Prepare the Computer.
CAUTION: Make
computer is turned off, the lid is
closed, and the AC Adapter is
disconnected. Failure to do so can
result in damage to the computer.
Place the computer upside down on a
protected surface with the front edge
facing you.
P/N 989200671 Rev. A
VPCCW Series Optical Disk Drive
IMPORTANT!
PLEASE READ BEFORE YOU START
1.
Step 2. Remove the Battery Pack.
Locate the release tab as shown in the
sure the
picture.
1. Slide the left battery tab to the
Unlock position.
2. With your finger slide the right
battery
direction and hold.
3. Hook your finger under the
battery pack and lift.
Replacement Instructions
3.
2.
tab in the release
1/3
(ODD Removal) Steps 3-6
Step 3. Locate ODD Bay
Rotate the computer with the Optical
Disk Drive (ODD) Bay facing you as
shown in the picture.