ZANEEN Tetra Parco Installation Instruction

Safety and warnings for installation:
• Installation and start-up must be carried out by qualifed personnel only.
• Carry out operations on device only with device disconnected from power supply.
• Connect to mains following the installation regulations in force.
• Do not remove power cable.
• Connection to the mains must be performed with certifed screw connectors, 120V, 3 x 2.5 mm
1.5 mm 2 , 2 x 2.5 mm
• Replace gasket at every relamping.
Suggestions on keeping the product
Keep installation instructions in the event of maintenance or disassembly operations, or make them
available for the personnel in charge.
Safety and warnings for installation:
UV
Use only UV-STOP lamps.
STOP
Replace lamp only when the device has cooled down and is not powered.
Use the device only with a complete disc.
30 Tycos Drive, Toronto, Ontario, Canada M6B 1V9 PH: 800.388.3382 / 416.247.9221 FAX: 416.247.9319 www.zaneen.com tech@zaneen.com
2 or 2 x 1.5 mm 2 , in junction box with protection level IP 67.
Tetra Parco
Installation Instruction
2
, 3 x
Page 1 of 6