Home Zone Security ELJ7040V Installation Instructions

Stainless steel solar motion sensor

Advertisement

s e c u r i t y

IMPORTANT SAFETY OPERATING INSTRUCTIONS

1.
Please read all warning and instruction labels which are included in the box and fixture to avoid personal injury, property damage
caused by fire, cuts, bruises, death and other dangers.
2.
Please follow these general precautions before installing, maintaining, or fixing
1. The packing contains small parts that could be swallowed by children
2. Keep the packaging material away from children and pets
3. The solar light is not a toy
4. We do not take responsibility if the instruction manual is not followed correctly or if the product is handled
improperly resulting in damage to person or property

PRECAUTION

1.
It is important to select an outdoor location with full, direct sunlight where the solar panel can receive at least 8 hours of sunlight
each day.
2.
It is important to avoid placing the solar light by light sources, such as street lights or porch lights, which may cause the solar light
to turn off automatically.
3.
To avoid explosion and corrosion, please keep the solar light away from fire and humid environment
4.
No striking to avoid any damages to solar cell
5.
Do not attempt to replace the battery

REF. PARTS

Solar Unit

PARAMETER:

1.
Dimension: approx. 5.12" (13cm) x 3.62" (9.2cm) x H.2.56" (6.5cm)
2.
Light source: 16pcs white LEDs
3.
Brightness: up to 100lumens when motion detected
4.
Sensor distance: 16.4feet (5m)
www.homezonesecurity.com
Stainless Steel Solar Motion Sensor (2-Pack)
2pcs Screws
and 2pcs Plastic Anchor
Model No. ELJ7040V
Pin
(888) 782-5618

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ELJ7040V and is the answer not in the manual?

Questions and answers

Summary of Contents for Home Zone Security ELJ7040V

  • Page 1 Stainless Steel Solar Motion Sensor (2-Pack) Model No. ELJ7040V s e c u r i t y IMPORTANT SAFETY OPERATING INSTRUCTIONS Please read all warning and instruction labels which are included in the box and fixture to avoid personal injury, property damage caused by fire, cuts, bruises, death and other dangers.
  • Page 2: Cleaning And Maintenance

    Stainless Steel Solar Motion Sensor (2-Pack) Model No. ELJ7040V s e c u r i t y HOW TO OPERATE AND INSTALL Figure 1 • Press the button to "ON" by inserting the Press Pin into the hole near the motion sensor Note: Lights with solar panel may have a protective film over the solar panel.

Table of Contents