Subscribe to Our Youtube Channel
Related Manuals for Tubo ROBO TR800
Summary of Contents for Tubo ROBO TR800
-
Page 1: Instruction Manual
INSTRUCTION MANUAL ROBÒ TR800 ROBOT VACUUM CLEANER AND FLOOR MOP EN - WARNING: READ THE INSTRUCTIONS BEFORE USE Version translated from the original... -
Page 2: Contents Of The Manual
SCAN THE QR CODE CONTENTS OF THE MANUAL We welcome you to the world of ROBÒ, your trusted assistant! ROUTINE MAINTENANCE GENERAL INFORMATION Routine maintenance schedule Safety and intended use We are delighted that you have chosen the Cleaning the dust container Battery and charging quality of Aertecnica to keep your home or Cleaning/replacing the filters... -
Page 3: General Information
GENERAL INFORMATION BATTERY AND CHARGING SAFETY AND INTENDED USE • Before using the robot, collect fragile objects, • Read the following manual before using • Only use the original battery charger to charge • Do not place the battery near sources of heat. ROBÒ. -
Page 4: Warranty
WARRANTY MATERIAL PROVIDED Warranty conditions for Italy PLEASE NOTE After opening the packaging, check that the following components – all supplied with ROBÒ – are present: AERTECNICA guarantees ROBÒ TR800 for a period The original packaging must be kept in case of 24 months starting from the documented the product must be shipped to the Technical (invoice or tax receipt) date of purchase. -
Page 5: Description Of The Components
DESCRIPTION OF THE COMPONENTS VIEW FROM ABOVE VIEW FROM BELOW ROBÒ charging dock ROBÒ push button panel Side sensor Main brush cover Connector for Main brush with air flow ring connecting the self-cleaning base Suction channel Rear wheel with Front swivelling wheel shock absorber VIEW FROM BELOW Anti-fall sensors... -
Page 6: Installation
The self-cleaning function can only be performed with the self-cleaning base. To disable this setting, move ROBÒ off the self-cleaning charging base and simultaneously press and hold for 3 seconds the button and the front collision guard, or disable it via the TUBO’ ROBÒ app. ROBÒ TR800 Instruction Manual... -
Page 7: Charging The Battery
CHARGING THE BATTERY TIPS FOR USE For improved cleaning efficiency, inspect the areas involved beforehand and prepare them as follows: FIRST ROBÒ CHARGE STAND-BY Once ROBÒ has been fully charged, it enters the When charging ROBÒ for the first time, place it • Clear the surfaces of the home from any obstacles that can be struck during cleaning, move any objects STAND-BY mode. -
Page 8: Cleaning Programmes
CLEANING PROGRAMMES ROBÒ CONTROL MODES After it starts, ROBÒ automatically calculates the ROBÒ has three control modes: Once cleaning terminates, ROBÒ returns to its charging base, empties the dust container (if the optimal cleaning route by choosing which path to ROBÒ... - Page 9 OPERATION WITH THE TUBÒ ROBÒ APP OPERATION WITH REMOTE CONTROL (applicable optional accessory) To use the TUBÒ ROBÒ app with a smartphone/tablet, it is The remote control allows for using the following functions: necessary to access the Internet through a Wi-Fi network. The full instructions for the remote control are inserted in the manual supplied with the product.
-
Page 10: Cleaning Modes
CLEANING MODES MAGNETIC BARRIER ROBÒ has two cleaning modes: DUST REMOVAL (STANDARD) - FLOOR WASHING ACCESSORY SUPPLIED (1 barrier supplied) The modes are enabled automatically on the basis of the type of container/tank inserted on ROBÒ. It is used to exclude rooms or areas of the home from the cleaning route covered by ROBÒ. -
Page 11: Routine Maintenance
CLEANING THE DUST CONTAINER - (SELF-CLEANING FUNCTION) ROUTINE MAINTENANCE WITH AUTOMATIC CHARGING BASE To guarantee optimal performances from ROBÒ, complete the single routine maintenance operations listed The dust container is cleaned automatically when ROBÒ returns to the self-cleaning charging base. in this chapter. -
Page 12: Cleaning / Replacing The Brushes
CLEANING / REPLACING THE FILTERS CLEANING / REPLACING THE BRUSHES Visit the tutorial area dedicated to ROBÒ on www.aertecnica.com Visit the tutorial area dedicated to ROBÒ on www.aertecnica.com HEPA FILTER AND SPONGE FILTER We recommend using the comb (C) supplied with ROBÒ. 1 - Remove the dust container and open the flap (S) of the filter compartment. -
Page 13: Cleaning The Sensors
CLEANING THE SENSORS TANK WITH WATER DISPENSER Visit the tutorial area dedicated to ROBÒ on Before using the FLOOR WASHING mode, the www.aertecnica.com tank with the water dispenser must be filled with water and then emptied at the end of the Use a damp cloth to clean all the sensors and washing cycle. -
Page 14: Troubleshooting
TROUBLESHOOTING The following table lists a series of inconveniences that may occur when using ROBÒ. If the user cannot solve problem, contact Aertecnica (in Italy only) or the authorised foreign retailer. PROBLEM CAUSE ACTION PROBLEM CAUSE ACTION Check for any obstructions and clean the The charging dock is not powered Check the power supply connection Main brush clogged... - Page 15 ROBÒ DISPOSAL WEEE COLLECTION CENTRE The regulations governing the disposal and demolition of ROBÒ, its components and any polluting materials and substances change in relation to the country of final use. We recommend contacting the authorised agencies and bodies and observing the applicable regulations. WEEE COLLECTION CENTRE WEEE COLLECTION CENTRE WEEE COLLECTION CENTRE...
-
Page 16: Ec Declaration Of Conformity
EC DECLARATION OF CONFORMITY The manufacturer, AERTECNICA S.p.A., with registered office in Via Cerchia di Sant'Egidio 760, 47521 Cesena (FC) - ITALY The descriptions and illustrations may vary. Aertecnica S.p.A. reserves the right to make changes to the product and to the relative technical documentation without prior notice. WITH REFERENCE TO: Robot vacuum cleaner and floor mop with charging base for central vacuum unit SERIES: ROBÒ...
Need help?
Do you have a question about the ROBO TR800 and is the answer not in the manual?
Questions and answers