Table of Contents
Advertisement
2.4
Connecting the cables
1.
Connect the cables as the following instructions:
•. To.connect.the.power.cord: Connect one end of the power cord securely to
the monitor's AC input port, the other end to a power outlet.
•. To.connect.the.HDMI/DisplayPort.cable:
a.
Plug one end of the HDMI/DisplayPort cable to the monitor's HDMI/
DisplayPort jack.
b.
Connect the other end of the HDMI/DisplayPort cable to your device's
HDMI/DisplayPort jack.
•. To.use.the.earphone: connect the end with plug type to the monitor's
earphone jack when an HDMI/DisplayPort signal is fed.
•. To.use.the.USB.3.0.ports:
»
Upstream: Take the supplied USB 3.0 cable, and plug the smaller end
(type B) of the USB cable to the monitor's USB upstream port, and the
larger end (type A) to your computer's USB 3.0 port. Make sure your
computer is installed with the latest Windows 7/Windows 8.1/Windows
10 operating system. That will enable the USB ports on the monitor to
work.
»
Downstream: Plug the USB Type A cable of your device to the monitor's
USB Type A jack.
When these cables are connected, you can choose the desired signal
from the Input Select item in the OSD menu.
2.
Attach the input/output port cover if needed.
2-4
For service only
Chapter 2: Setup
Advertisement
Table of Contents
