Advertisement
Quick Links
12" & 18" QUICK STAIR
ASSEMBLY INSTRUCTIONS
12" QUICK STAIR (0105-37-12)
18" QUICK STAIR (0105-37-18)
PRINTED IN USA
P/N: LL-204-91
Assembly Instructions Include:
Parts List
Assembly Instructions
Quick Stair with AS2100 Stage
Quick Stair with ST8100 Stage
Rev: 0
Advertisement
Summary of Contents for Haulotte Group Biljax Multi-Stage AS 2100 0105-37-12
- Page 1 12” & 18” QUICK STAIR ASSEMBLY INSTRUCTIONS 12” QUICK STAIR (0105-37-12) 18” QUICK STAIR (0105-37-18) PRINTED IN USA P/N: LL-204-91 Assembly Instructions Include: Parts List Assembly Instructions Quick Stair with AS2100 Stage Quick Stair with ST8100 Stage Rev: 0...
-
Page 2: Parts List
PARTS LIST 0105-30-0063 0105-30-0065 0105-30-0060 18” HANDRAIL STIFFENER BAR 12” HANDRAIL 0030-0137 0105-0014 0105-0010 RUBBER BASE PAD QUICK STAIR TREAD QUICK STAIR TREAD WITH HANGER BRACKET WITH HANGER BRACKET AND ANGLE IRON FILLER STRIP 0105-01-06L 0105-01-06R CASTER BRACKET CASTER BRACKET ASSEMBLY LEFT ASSEMBLY RIGHT... - Page 3 ASSEMBLY INSTRUCTIONS FOR 12” STAIR Step 1: Install rubber base pads (0030-0137) to the bottom of the 12” handrail (0105-30-0060). Thread in the full length while assembling the stair unit. Step 2: Install the stiffener bar (0105-30-0065) and Caster Assembly (0105-01-06) with the four bolts included with the two caster assemblies.
- Page 4 Step 3: Install the stair treads starting from the bottom of the stair unit and work your way to the top of the stair unit. Start by using stair tread with hanger bracket (0105-0010) and four 3/8” x 2” hex head bolts (0090-0048) and four split lock washer (0090-0210).
- Page 5 ASSEMBLY INSTRUCTIONS FOR 18” STAIR Step 1: Install rubber base pads (0030-0137) to the bottom of the 12” handrail (0105-30-0060). Thread in the full length while assembling the stair unit. Step 2: Install the stiffener bar (0105-30-0065) with four 3/8” x 2” hex head bolts (0090-0048) and four split lock washer (0090-0210).
- Page 6 Step 3: Install the Caster Assemblies (0105-01-06) with the four attached bolts. Do not tighten bolts fully until the stair unit is completely assembled. Step 4: Install the stair treads starting from the bottom of the stair unit and work your way to the top of the stair unit.
- Page 7 Step 5: Install the top step stair tread with hanger bracket and angle iron filler strip (0105-0014) and four 3/8” x 2” hex head bolts (0090-0048) and four split lock washer (0090-0210). Assemble tread so that the angle iron filler strip faces the top of the stair unit. Step 6: Ensure that the stair unit is sitting on a level surface then go around and tighten all bolts...
- Page 8 QUICK STAIR WITH AS2100 STAGE 1. Install two stair locks (0106-30-0067) into stage side rails Insert into stage side rail then rotate 90º counter clockwise in to locked position. 2. Position Quick Stair up against stage with stair locks as shown in installed pictured above. 3.
- Page 9 QUICK STAIR WITH ST8100 STAGE 1. Install two stair locks (0105-30-0067) onto stair as shown above. Do not tighten bolts yet. 2. Position Quick Stair up against stage then slide the stair locks up so that they capture the stage side rail then tighten bolt and nut.
Need help?
Do you have a question about the Biljax Multi-Stage AS 2100 0105-37-12 and is the answer not in the manual?
Questions and answers