Advertisement
1
CameoGrip is a retro-style, electronic handgrip that
can control camera and lens functions for cameras
that support the LANC remote control protocol, as
well as Sony cameras with a Multi-Terminal port.
It can be mounted three ways: Bolex-style under a
small camera, as a handgrip on an over-the-shoulder
camera, or on a pan-arm grip using a third party
clamp.
Features
Grip
•
Aluminum Spine
•
Stainless steel knob and screw
•
ABS housing
Controls
•
2 axis joystick for controlling zoom
and iris (depending on camera and lens
compatibility)
•
Run/Stop button to start/stop recording
•
2x programmable buttons
Connector
•
1x 8-pin Hirose connector for
connecting to camera
•
MicroUSB connector for firmware
updates
often understated, always essential
CAMEO G RIP
Advertisement
Table of Contents
Summary of Contents for CameoGear CAMEOGRIP
- Page 1 CAMEO G RIP CameoGrip is a retro-style, electronic handgrip that can control camera and lens functions for cameras that support the LANC remote control protocol, as well as Sony cameras with a Multi-Terminal port. It can be mounted three ways: Bolex-style under a...
- Page 2 Connecting CameoGrip to Your Camera Every CameoGrip includes a cable with a Hirose 8-pin connector on one side and either a Multi-Terminal or LANC connector on the other. Connect the Hirose side of this cable to the female Hirose connector on the back of the grip. Ensure that the connectors are lined up properly in order to prevent pin damage –...
- Page 3 CameoGrip can be mounted three different ways: Bolex Style Shoulder Mounted On a Tripod Pan Arm CameoGrip can be Use the included Attach to a tripod pan used under a light- rosette adapter arm via the Rosette weight camera. to attach to an...
- Page 4 Canon camera. Note: The direction and axes of the joystick functions can be reassigned using the CameoGrip Updater software, which runs on a Windows PC or Mac. Just connect the CameoGrip to the computer using its USB port.
- Page 5 To load new firmware onto the CameoGrip, first download the update file from the CameoGear site. Then click the “Load Firmware” button in the software. The following window will appear: Thank you for purchasing the CameoGrip.
- Page 6 AbelCine* warrants all CameoGear products to be free of defects in materials and workmanship for a period of one year from the date of purchase. This warranty does NOT cover: Damage or malfunction resulting from accident, misuse, abuse or neglect...
Need help?
Do you have a question about the CAMEOGRIP and is the answer not in the manual?
Questions and answers