Signature Hardware Stone Vessel Sink Installation Instructions & User Manual

STONE VESSEL SINK INSTALLATION

BEFORE YOU BEGIN

We recommend consulting a professional if you are

unfamiliar with installing bathroom ﬁxtures and plumb-

ing. Signature Hardware accepts no liability for any

damage to the ﬂoor, walls, plumbing, vanity cabinet, sink,

counter top, or personal injury during installation.

Observe all local plumbing and building codes.

Unpack and inspect the sink for damage. If any damage

is found, contact our Customer Relations team at

1-866-855-2284.

GETTING STARTED

Ensure that you have gathered all the required

materials that are needed for the installation.

For the following instructions, it is assumed that the

vanity and countertop are already in place.

TOOLS AND MATERIALS:

Silicone Sealant

Damp Cloth

(100% Neutral

Cure)

Stone Vessel Sink Installation Instructions

Table of Contents

Do you have a question about the Stone Vessel Sink and is the answer not in the manual?

Page 1 TOOLS AND MATERIALS: BEFORE YOU BEGIN We recommend consulting a professional if you are unfamiliar with installing bathroom ﬁxtures and plumb- ing. Signature Hardware accepts no liability for any damage to the ﬂoor, walls, plumbing, vanity cabinet, sink, Silicone Sealant Damp Cloth counter top, or personal injury during installation.
Page 2 2. Turn the sink right-side-up and position over the 4. Remove any excess sealant with a damp cloth to drain hole. Set the sink in place, and press ﬁrmly to complete installation. secure. Stone Vessel Sink Installation Instructions...
Page 3 Do not allow mineral deposits such as iron, salt, lime, or soap to build up on your sink. Refrain from using acidic household cleaners, wipes with harsh chemicals, or abrasives, as these will damage stone. Seal the stone with a quality sealer, such as StoneTech, to prevent staining and discoloration. Stone Vessel Sink Installation Instructions...