Ce Declaration Of Conformity - Telcoma T400 Instructions For Installing

GB
11) Inform the user in writing (in the use instructions for example):
a. Of possible non secluded residual risks and of foreseeable improper use.
b. To disconnect the power supply when cleaning the area that is automated or when performing small
maintenance operations (e.g.: repainting).
c. To frequently control that no visible damage has occurred to the automation, and to inform the installer
immediately if damage is noticed.
d. Never allow children to play with automation controls.
e. Keep remote controls out of the reach of children.
12) Prepare a maintenance schedule for the automation installation (at least once every 6 months for the safety
devices), recording the work carried out in a special book.
In line with its continual product improvement policy, both in aesthetic and functional terms, TELCOMA Srl
reserves the right to make changes at any time without notice.
DISPOSAL
This product is made up of various components that could contain pollutants. Dispose of properly! Make enquiries
concerning the recycling or disposal of the product, complying with the local laws in force.
The undersigned Ennio Ambroso, The Legal representative of the firm:
TELCOMA S.r.l. Via Luigi Manzoni 11, 31015 Conegliano (TV) ITALY
Declares that the product:
Model: T400
Use: Gate operator control unit
Complies with the essential requirements of section 3 and relative provisions of the Directive 1999/5/
CE, if used for the purposes for which it has been designed.
Complies with the essential requirements of Directive 89/336 (EMC), EN61000-6-3, EN61000-6-1 and
subsequent amendments, if used for the purpose for which it has been designed.
Complies with the essential requirements of Directive 73/23 (LVD), EN60335-1 and subsequent
amendments, if used for the purpose for which it has been designed.
Place and date:
Conegliano, 30/05/2011
52

CE DECLARATION OF CONFORMITY

The Legal representative
Ennio Ambroso