Xterior MICRO FACET LED Installation, Cleaning And Maintenance

MICRO FACET LED
PRODUCT OVERVIEW
Current Power
350mA 1W
LED
INSTALLATION, CLEANING AND MAINTENANCE
1. This LED luminaire must be connected in series to a
350mA constant current converter.
WARNING! Incorrect connection may damage the
luminaire
2. Note the prescribed dimensions before installation
3. Ensure that the cables are not squeezed or
damaged by sharp edges
4. Clean the appliance with a soft cloth and a
standard PH neutral detergent
5. Stainless steel surfaces should be maintained
LED Beam Angle
CREE 120°
IP67
RECESSED EXTERIOR IP67 FLOOR WASHER
Dimensions
D.Ø28mm x H.23mm
regularly
6. Misuse of, or changes to the appliance shall nullify the
guarantee
7. The manufacturer is free to change the design, specifi-
cations and instructions of assembly
8. Connect the luminaire to the converter before the con-
verter is connected to the power source
9. The external flexible cable of this luminaire cannot be
replaced; if the cord is damaged the luminaire needs to
be replaced.
enquiries@dld-contract.com
Material IP Grade
SS316 + Al IP67
+44 (0)1189 889414