CruzPro D60 Manual

Warranty
Each CruzPro product is carefully tested and
calibrated at the factory before shipping and is
warranted for one full year against original
defects in materials or workmanship.
warranty does not include damage to the
product resulting from accident or misuse.
If the product should become defective within
the warranty period, we will repair or replace
it free of charge, including free return
transportation, provided it is delivered prepaid
to the dealer from whom it is originally
purchased.
This warranty gives you specific legal rights,
and you may also have other rights which vary
from state to state, or country to country.

Setting Display Damping

While viewing Depth press and hold the
keys keys for ten (10) seconds until you hear a long
beep. The display damping value is shown. Use the
s t
and keys to change the value and press the
key to save your entry. A larger value of damping
will slow down the flickering of the displayed digits
but result in a slower response to depth changes.
The display damping limits are 5 to 20 with 10
being the default value.
Page 14
CruzPro
D60
This
1000 Foot
DSP Depth Sounder
With Keel Offset and Alarms
Page 1
s t The D60 is a compact digital depth gauge. The D60
and
uses Digital Signal Processing (DSP) to reliably
display water depth from 1.2 foot (0.3 Metre) to
1000 feet (365 Metres). Depth can be displayed in
:
feet, metres or fathoms. Variable display damping
is provided.
The D60 has programmable shallow, deep and anchor
drag alarms built-in and can display the depth in feet,
metres or fathoms. A keel offset from -20.0 to +20.0
feet can be entered so the D60 shows the depth below
the surface, below the keel or below the transducer.
Five levels of backlighting can be selected for nighttime
viewing and all setup constants are saved in a nonvolatile
memory.

Introduction

Page 3