1. Manuals
  2. Brands
  3. Digital Spectrum Manuals
  4. Motherboard
  5. TMS320C6413
  6. Technical reference

Digital Spectrum TMS320C6413 Technical Reference

Evm
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
TMS320C6413/C6418 EVM
Technical
Reference
2004
DSP Development Systems

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TMS320C6413 and is the answer not in the manual?

Questions and answers

Summary of Contents for Digital Spectrum TMS320C6413

  • Page 1 TMS320C6413/C6418 EVM Technical Reference 2004 DSP Development Systems...
  • Page 3 TMS320C6413/C6418 EVM Technical Reference 507265-0001 Rev. B October 2004 SPECTRUM DIGITAL, INC. 12502 Exchange Drive, Suite 440 Stafford, TX. 77477 Tel: 281.494.4505 Fax: 281.494.5310 sales@spectrumdigital.com www.spectrumdigital.com...
  • Page 4 IMPORTANT NOTICE Spectrum Digital, Inc. reserves the right to make changes to its products or to discontinue any product or service without notice. Customers are advised to obtain the latest version of relevant information to verify that the data being relied on is current before placing orders. Spectrum Digital, Inc.

  • Page 5: Table Of Contents

    ......Provides you with a description of the TMS320C6413/C6418 EVM Module, key features, and block diagram.
  • Page 6 ............. . Contains the schematics for the TMS320C6413/C6418 EVM and Keypad/display Module TMS320C6413/C6418 EVM Schematics .
  • Page 7 Evaluation Module (EVM). The EVM is based on the Texas Instruments TMS320C6413/C6418 Digital Signal Processor. The TMS320C6413/C6418 EVM is a table top card to allow engineers and software developers to evaluate certain characteristics of the TMS320C6413/C6418 DSP to determine if the processor meets the designers application requirements. Evaluators can create software to execute onboard or expand the system in a variety of ways.
  • Page 8 Table 1: Hardware History Revision History Alpha Release Table 2: Manual History Revision History Alpha Release Text Updates...

  • Page 9: Key Features

    Chapter 1 Introduction to the TMS320C6413/C6418 EVM Chapter One provides a description of the TMS320C6413/C6418 EVM along with the key features and a block diagram of the circuit board. Topic Page Key Features Functional Overview Display/Keypad Overview Basic Operation Memory Map Jumper Settings 1.6.1...
  • Page 10 The C6413/C6418 EVM is a standalone development platform that enables users to evaluate and develop applications for the TI C64XX DSP family. The EVM also serves as a hardware reference design for the TMS320C6413/C6418 DSP. Schematics, logic equations and application notes are available to ease hardware development and reduce time to market.
  • Page 11 • JTAG emulation via external emulator • Single voltage power supply (+5V) 1.2 Functional Overview of the TMS320C6413/C6418 EVM The DSP interfaces to external SDRAM, SBRAM, Flash memory and an expansion memory interface connector through its 32-bit External Memory Interface (EMIF). The SDRAM accesses are in 32-bit mode in chip enable 0 memory space.
  • Page 12 JTAG emulator. To start, follow the instructions in the emulator’s Quick Start Guide to install Code Composer. This process will install all of the necessary development tools, documentation and drivers. TMS320C6413/C6418 EVM Module Technical Reference...
  • Page 13 Spectrum Digital, Inc 1.5 Memory Map The C64xx family of DSPs has a unified program and data space. Both programs and data can reside anywhere in the unified memory space. The address reach of the C6413/C6418 is 32 bits. The external memory interface controller (EMIF) divides the off chip address space into 4 equally sized chip enable (CE) spaces when dealing with external memory.
  • Page 14 The jumpers drive signals that directly correspond to the input on one of the DSP’s configuration pins. If the jumper is on, the signal is driven to a logic 0. If the jumper is off, the signal is driven to a logic 1. TMS320C6413/C6418 EVM Module Technical Reference...
  • Page 15 TheC6413/C6418 has a number of clock multiplier modes that are selected at reset by sampling the CLKMODE[3-0] pins. These pins can be configured with the on-board jumpers. The jumper configuration is shown in the table below. Table 1: TMS320C6413/C6418 EVM CLKMODE Multiplier CLKM3 CLKM2...
  • Page 16 At reset address lines A21 and A22 are sampled to determine the boot option of the processor. although there are four modes available only 2 modes are not reserved. These are 8 bit boot from CE1 which is the default on the EVM and no boot. TMS320C6413/C6418 EVM Module Technical Reference...
  • Page 17 Spectrum Digital, Inc 1.7.2 EMIFA Clock Select Address lines A19 and A20 are sampled at reset and determine the EMIF clock configuration selection. The EMIF clock is either a divider of the internal CPU clock controlled by the PLL or is driven directly at the frequency supplied on the AECLKIN pin.
  • Page 18 Spectrum Digital, Inc 1-10 TMS320C6413/C6418 EVM Module Technical Reference...

  • Page 19: Board Components

    Chapter 2 Board Components This chapter describes the operation of the major board components on the TMS320C6413/C6418 EVM. Topic Page CPLD (Programmable Logic) 2.1.1 CPLD Overview 2.1.2 CPLD Registers 2.1.3 USER_REG Register 2.1.4 DC_REG Register 2.1.5 Version Register 2.1.6 MISC Register 2.1.7...

  • Page 20: Cpld Overview

    EEPROM-based and is in-system programmable via a dedicated JTAG interface (a 10-pin header on the EVM). The CPLD source files are written in the industry standard VHDL (Hardware Design Language) and are included with the EVM on the installation CD-ROM. TMS320C6413/C6418 EVM Module Technical Reference...

  • Page 21: Cpld Registers

    Spectrum Digital, Inc 2.1.2 CPLD Registers The multiple CPLD memory-mapped registers allows users to control CPLD functions in software. On theC6413/C6418 EVM the registers are primarily used to access the LEDs and DIP switches, provide LCD interface, and control the daughter card interface. The registers are mapped into the EMIF data space at word address 0x900F010, in the upper portion of CE1.
  • Page 22 Daughter Card Status 0 (0=Low, 1 = High) DC_RST Daughter Card Reset (0=No Reset, 1 = Reset) Always zero DC_CNTL1 Daughter Card Control 1(0 = Low, 1 = High) DC_CNTL0 Daughter Card Control 0(0 = Low, 1 = High) TMS320C6413/C6418 EVM Module Technical Reference...

  • Page 23: Version Register

    Spectrum Digital, Inc 2.1.5 VERSION Register The VERSION register contains two read only fields that indicate the BOARD and CPLD versions. This register will allow your software to differentiate between production releases of the EVM and account for any variances. This register is not expected to change often, if at all.

  • Page 24: Lcd Interface

    Register as the output is being serialized. The user should check this bit prior to starting another write operation. When LCD BUSY is high, the LCD shift register is busy, when is low the shift register is ready. TMS320C6413/C6418 EVM Module Technical Reference...

  • Page 25: C6413/C6418 Evm Interface Register

    Spectrum Digital, Inc 2.1.8 C6413/C6418 EVM Interface Register The C6413/C6418 EVM Interface Register implements specific logic for the C6413/ C6418 EVM. The bits used in this register and their function are described in the table below. Table 7: C6413/C6418 EVM Interface Register Name Description LCD Busy...

  • Page 26: Aic23 Codec

    SAMPLERATE Analog Digital DIGACT 15 RESET LINE OUT McBSP1 DOUT MIC IN FSX1 LRCOUT CLKR1 LINE IN DSP Format BCLK CLKX1 LRCIN FSR1 LINE OUT HP OUT HP OUT Figure 2-1, TMS320C6413/C6418 EVM CODEC INTERFACE TMS320C6413/C6418 EVM Module Technical Reference...

  • Page 27: Sbram Memory

    Spectrum Digital, Inc 2.3 Synchronous DRAM The EVM uses an industry standard 64 megabit Synchronous SDRAM. It uses a 32-bit interface and is used with up a maximum 100 MHz. memory clock. Since the DSP runs at 500 or 600 MHz, the EMIF must be programmed to use the SDRAM at a divider of the core clock rate or use the alternate EMIF Clock input.

  • Page 28: Daughter Card Interface

    This function is controlled through the CPLD MISC register. The timer signals on the peripheral expansion connector have connections for both inputs and outputs. These map to the TIN and TOUT pins on the C6413/C6418 device. 2-10 TMS320C6413/C6418 EVM Module Technical Reference...
  • Page 29 Spectrum Digital, Inc 2.8 TL16C550 UART The C6413/C6418 EVM has an on board TLC16C550 UART. The UART is buffered with a SN75LV4737A RS-232 line driver and is routed to a male 9 pin D-connector, P4. The pin positions for the P4 connector as viewed from the edge of the printed circuit board are shown below.
  • Page 30 Spectrum Digital, Inc 2-12 TMS320C6413/C6418 EVM Module Technical Reference...

  • Page 31: Tms320C6413/C6418 Evm Board Layout

    Chapter 3 Physical Description This chapter describes the physical layout of the TMS320C6413/C6418 EVM and its connectors. Topic Page TMS320C6413/C6418 EVM Board Layout Keypad/display Module Layout Connector Index Expansion Connectors 3.4.1 P1, Memory Expansion Connector 3.4.2 P2, Peripheral Expansion Connector 3.4.3...
  • Page 32 Spectrum Digital, Inc 3.1 TMS320C6413/C6418 EVM Board Layout The C6413/C6418 EVM is a 8.25 x 4.5 inch (210 x 115 mm.) multi-layer board which is powered by an external +5 volt only power supply. The figure below shows the layout of the C6413/C6418 EVM.
  • Page 33 Spectrum Digital, Inc 3.2 Keypad/display Module Layout The Keypad/display Module is a 3.1 x 4.4 inch (79 x 112 mm.) multi-layer board which is powered from the EVM. The figure below shows the layout of the Keypad/display Module. Figure 3-2, Keypad/display Module...
  • Page 34 Spectrum Digital, Inc 3.3 Connector Index The TMS320C6413/C6418 EVM has many connectors which provide the user access to the various signals on the EVM. Table 1: TMS320C6413/C6418 EVM Connectors Connector # Pins Function Memory Peripheral RS-232 Port Display - Keypad...

  • Page 35: P1, Memory Expansion

    Spectrum Digital, Inc 3.4.1 P1, Memory Expansion Connector Table 2: P1, Memory Expansion Connector Pin # Signal Name I/O/Z Pin # Signal Name I/O/Z +5 Volts +5 volts +5 Volts +5 Volts BE3n BE2n BE1n BE0n I/O/Z I/O/Z I/O/Z I/O/Z I/O/Z I/O/Z I/O/Z...

  • Page 36: P2, Peripheral Expansion

    FSR1 I/O/Z TOUT0 TIN0 INT0n INT5n TOUT1 TIN1 INT4n IACKn RESERVED INT7n RESERVED RESERVED RESETn RESERVED DC_CNTL1 DC_CNTL0 DC_STAT1 DC_STAT0 INT6n RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED DETECTn CLKOUT * Enable via CPLD Bit TMS320C6413/C6418 EVM Module Technical Reference...

  • Page 37: P3, Hpi Expansion Connector

    Spectrum Digital, Inc 3.4.3 P3, HPI Expansion Connector Table 4: P3, HPI Expansion Connector Pin # Signal Name I/O/Z Pin # Signal Name I/O/Z Reserved +5 Volts I/O/Z HPI_RESET I/O/Z I/O/Z I/O/Z HD30 HD31 HD28/AMUTE1 HD29/AMUTEIN1 HD26/AHCHKR1 HD27/AHCLKX1 HD24/ACLKX1 HD25/ACLKR1 HD22/AFSX1 HD23/AFSR1 HD20/AXR1[4]...

  • Page 38: Audio Connectors

    The audio line in is a stereo input. The input connector is a 3.5 mm stereo jack. The signals on the mating plug are shown in the figure below. Ground Right Line In Left Line In Figure 3-4, Audio Line In Stereo Jack TMS320C6413/C6418 EVM Module Technical Reference...

  • Page 39: J3, Audio Line Out Connector

    Spectrum Digital, Inc 3.5.3 J3, Audio Line Out Connector The audio line out is a stereo output. The output connector is a 3.5 mm stereo jack. The signals on the mating plug are shown in the figure below. Ground Right Line Out Left Line Out Figure 3-5, Audio Line Out Stereo Jack 3.5.4 J4, Headphone Connector...

  • Page 40: Power Connectors

    3.6.1 J5, +5 Volt Connector Power (+5 volts) is brought onto the TMS320C6413/C6418 EVM via the J5 connector. The connector has an outside diameter of 5.5 mm. and an inside diameter of 2.5 mm. The A diagram of J5 is shown below.

  • Page 41: Miscellaneous Connectors

    Reserved 3.7.2 J7, External JTAG Connector The TMS320C6413/C6418 EVM is supplied with a 14 pin header interface, J7. This is the standard interface used by JTAG emulators to interface to Texas Instruments DSPs. The pinout for the connector is shown figure 3-6 below.

  • Page 42: Jp1, Pld Programming Connector

    RESET Active 3.10 Reset Circuitry There are three resets on the TMS320C6413/C6418 EVM. The first reset is the power on reset. This circuit waits until power is within the specified range before releasing the power on reset pin to the TMS320C6413/C6418.

  • Page 43: Schematics

    Appendix A Schematics This appendix contains the schematics for the TMS320C6413/C6418 EVM and the keypad/display module. Topic Page TMS320C6413/C6418 EVM Schematics Keypad/display Module Schematics A-26...
  • Page 44 Spectrum Digital, Inc TMS320CC6413/6418 EVM Module Technical Reference...
  • Page 45 Spectrum Digital, Inc...
  • Page 46 Spectrum Digital, Inc TMS320CC6413/6418 EVM Module Technical Reference...
  • Page 47 Spectrum Digital, Inc...
  • Page 48 Spectrum Digital, Inc TMS320CC6413/6418 EVM Module Technical Reference...
  • Page 49 Spectrum Digital, Inc...
  • Page 50 Spectrum Digital, Inc TMS320CC6413/6418 EVM Module Technical Reference...
  • Page 51 Spectrum Digital, Inc...
  • Page 52 Spectrum Digital, Inc A-10 TMS320CC6413/6418 EVM Module Technical Reference...
  • Page 53 Spectrum Digital, Inc A-11...
  • Page 54 Spectrum Digital, Inc A-12 TMS320CC6413/6418 EVM Module Technical Reference...
  • Page 55 Spectrum Digital, Inc A-13...
  • Page 56 Spectrum Digital, Inc A-14 TMS320CC6413/6418 EVM Module Technical Reference...
  • Page 57 Spectrum Digital, Inc A-15...
  • Page 58 Spectrum Digital, Inc A-16 TMS320CC6413/6418 EVM Module Technical Reference...
  • Page 59 Spectrum Digital, Inc A-17...
  • Page 60 Spectrum Digital, Inc A-18 TMS320CC6413/6418 EVM Module Technical Reference...
  • Page 61 Spectrum Digital, Inc A-19...
  • Page 62 Spectrum Digital, Inc A-20 TMS320CC6413/6418 EVM Module Technical Reference...
  • Page 63 Spectrum Digital, Inc A-21...
  • Page 64 Spectrum Digital, Inc A-22 TMS320CC6413/6418 EVM Module Technical Reference...
  • Page 65 Spectrum Digital, Inc A-23...
  • Page 66 Spectrum Digital, Inc A-24 TMS320CC6413/6418 EVM Module Technical Reference...
  • Page 67 Spectrum Digital, Inc A-25...
  • Page 68 Spectrum Digital, Inc A-26 TMS320CC6413/6418 EVM Module Technical Reference...
  • Page 69 Spectrum Digital, Inc A-27...
  • Page 70 Spectrum Digital, Inc A-28 TMS320CC6413/6418 EVM Module Technical Reference...
  • Page 71 Spectrum Digital, Inc A-29...
  • Page 72 Spectrum Digital, Inc A-30 TMS320CC6413/6418 EVM Module Technical Reference...

  • Page 73: B Mechanical Information

    Appendix B Mechanical Information This appendix contains the mechanical information about the TMS320C6413/C6418 EVM and Keypad/display Module produced by Spectrum Digital. Topic Page TMS320C6413/C6418 EVM Mechanical Information Keypad/display Module Mechanical Information...
  • Page 74 Spectrum Digital, Inc TMS320C6418 EVM Module Technical Reference...
  • Page 75 Spectrum Digital, Inc...
  • Page 76 Spectrum Digital, Inc TMS320C6418 EVM Module Technical Reference...
  • Page 78 Printed in U.S.A., October 2004 507265-0001 Rev. B...

This manual is also suitable for:

Tms320c6418

Table of Contents