The Channel Control - Philips 32PT740H37A Directions For Use Manual

S
ETTING THE
Y
ou can select a specific channel that the
television will tune to when the timer
turns the set ON. Follow these steps to select
the channel.
1
Press the MENU button on the
remote control to show the onscreen
menu.
2
Press the CURSOR DOWN button
twice to highlight FEATURES.
3
Press the CURSOR RIGHT button and
the menu will shift to the left. TIMER will
be highlighted.
4
With TIMER selected, press the CUR-
SOR RIGHT button again to shift the
display left.
5
Press the CURSOR DOWN button
to highlight the CHANNEL Control.
6
Press the NUMBERED buttons to
enter the desired start-up channel. Or,
press the CURSOR RIGHT or CUR-
SOR LEFT button repeatedly to enter
the start-up channel you want.
NOTE: The ACTIVATE Control (page 25)
must be set to ONCE or DAILY for this
Channel Control to take effect.
7
Press the STATUS/EXIT button to
remove the menu from the screen.
H
ELPFUL
The ACTIVATE Control must be set to
ONCE or DAILY for the television to shut
itself off at the specified time. See page 25
for more details about the ACTIVATE
Control.
TV
H
INT
S
TO TARTUP ON A
PICTURE TIMER
SOUND ACTIVE CTRL
AutoLock
FEATURES
INSTALL CLOSED CAP
FORMAT
6
1
6
2
5
24
S C
PECIFIC HANNEL
FEATURES
TIMER
ACTIVE CTRL
AutoLock
CLOSED CAP
FORMAT
FEATURES
FEATURES
TIMER
TIME
START TIME
STOP TIME
CHANNEL
ACTIVATE
7
FEATURES
FEATURES
TIMER
TIME
START TIME
STOP TIME
CHANNEL
3
ACTIVATE
4
6
TIME
START TIME
STOP TIME
CHANNEL
ACTIVATE
_ _:_ _
12