Table of Contents
Advertisement
Decoder allocation
Some TV channels transmit encoded TV signals
which can only be viewed with a purchased or
rented decoder. You can connect such a decoder
to this video recorder. The following function will
automatically activate the connected decoder for
the desired TV channel.
1.
1.
Switch the TV on. If applicable, select the
programme number for the video recorder
operation.
2.
2.
Use
or
P +
0..9
P–
gramme number which you would like to allo-
cate the decoder to.
3.
3.
Press
. The main menu will appear.
MENU
4.
4.
Use
or
PLAY B-K
SET UP'. Then press
5.
5.
Use
or
PLAY B-K
'MANUAL TUNING'. Then press
6.
6.
Use
or
PLAY B-K
'DECODER'
MANUAL TUNING
PROG.
CHANNEL
DECODER
SKIP
VIDEO MODE
SELECT K L CHOOSE B
END=EXIT
7.
7.
Use
to select 'ON'
FWD
1- B
(Decoder switched on).
How can I switch off the decoder?
Use
to select 'OFF' (Decoder
FWD 1- B
switched off).
8.
8.
To end, press
STATUS/EXIT
The decoder has now been allocated to this pro-
gramme number.
Manual TV channel search
In some cases it can occur that all TV channels
are not found and saved during the first installa-
tion. In this case, the missing or coded TV chan-
nels must be searched for and stored manually.
1.
1.
Switch on the TV. If required, select the pro-
gramme number for the video recorder.
2.
2.
Press
. The main menu will appear.
MENU
to select the pro-
to select 'TUNER
STOP C-L
.
FWD 1- B
to select
STOP C-L
FWD 1- B
to select
STOP C-L
P55
055
[OFF]
[OFF]
[SECAM]
.
3.
3.
Use
PLAY B-K
SET UP'. Then press
4.
4.
Use
PLAY B-K
'MANUAL TUNING'. Then press
MANUAL TUNING
PROG.
CHANNEL
DECODER
SKIP
VIDEO MODE
SELECT K L CHOOSE B
END=EXIT
5.
5.
Select 'PROG.' with
Then press
6.
6.
With
PLAY B-K
desired programme number that you want to
use for the TV channel, e.g. 'P01'. Then press
.
FWD 1- B
.
7.
7.
Select 'CHANNEL' with
and confirm with
desired channel with
If you set ' SKIP ' on for a channel, this channel
will be ignored when going through the channels
P +
with
P–
.
I don't know the channels for my TV stations
In this case, press
'CHANNEL' to start the automatic channel
search. A changing channel number will appear
on the TV screen. Continue the automatic
search until you have found the desired TV
channel.
8.
8.
Save the TV channel with
9.
9.
To search for other TV channels, begin again
at step 5.
10.
10.
To end, press
How do I change 'VIDEO MODE'?
If you want to change the video mode, select
'VIDEO MODE' with
Then, press
FWD 1- B
mode.
Using the satellite receiver
Satellite channels from a satellite receiver (con-
nected to the scart socket AV2 (DECODER)) are
received on the video recorder. Select pro-
gramme number 'AV2' with 0.0.2 .
You should select the satellite channels to be
received by the satellite receiver directly on the
receiver itself.
8
or
to select 'TUNER
STOP C-L
.
FWD 1- B
or
to select
STOP C-L
FWD 1- B
P55
055
[OFF]
[OFF]
[SECAM]
or
PLAY B-K
.
FWD 1- B
,
, select the
or
0..9
STOP C-L
or
PLAY B-K
. Then enter the
FWD
1- B
0..9
.
or
PLAY B-K
STOP C-L
FWD 1- B
STATUS/EXIT
.
or
PLAY B-K
STOP C-L
to select your desired
.
STOP C-L
.
,
STOP C-L
in
.
.
EN
Advertisement
Table of Contents
