Advertisement
Quick Links
RadianceRail
®
Visit www.timbertech.com/installation to view TimberTech installation videos.
Consult your local building codes for gate requirements
The RadianceRail Gate Kit is a convenient way to add a premium gate to your railing system.
Important Information
• The RadianceRail Gate Kit is designed to work with RadianceRail only.
• The maximum width of a gate built with a Gate Kit is 48".
• Gates should always swing away from the stairs when opening.
• Be sure to install on a post that is plumb; this is critical for the gate to
operate properly.
• Installation is easiest with two people.
Component Dimensions
Gate Latch & Stop
Aluminum Side Rails
Butt hinges
Assorted Screws
Screws
Aluminum Side Rails
Black Butt Hinges
Screws
10
8
or
Gate Kit
11
9
7
Components Needed For Installing One
RadianceRail Gate with the RadianceRail Gate Kit
RadianceRail Rail
1 - Top Rail
Pack
1 - Bottom Rail
2 - Support Rails
T-20 Torx driver bit
*Additional items are included but are not needed.
Square Balusters
RadianceRail Baluster
- 13 in 6' Kits - 18 in 8' Kits
Baluster Screw Kit
Pack
2 - Aluminum Side Rails (Brackets Attached)
RadianceRail Gate Kit
2 - 4" Black Butt Hinges
1 - Gate Latch and Stop
8 - 3/16" x 1" Self-Drilling Flat Head Screws (black)
8 - 3/16" x 2" Flat Head Screws (black)
2 - 3/16" x 3/4" Self-Drilling Screws (black)
4 - 1/4" x 1" Screws (frame color)
2 - 1/4" x 2" Screws (frame color)
Tools Required
• Miter Saw (blade
• Tape Measure
designed for finish cuts)
• 7/64" and 11/64" drill bits
• Drill
• Phillips Driver Bit
• Level
Tools Recommended
• Ratchet
Top Rail
Support Rail
Gate Latch
Baluster
Aluminum Side Rails
Bottom Rail
Support Rail
Baluster Screw Kit-6' Kits
13 - #8x2" Coated Screws
13 - #8x3" Coated Screws
Baluster Screw Kit-8' Kits
18 - #8x2" Coated Screws
18 - #8x3" Coated Screws
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Timbertech RadianceRail
Summary of Contents for Timbertech RadianceRail
- Page 1 ® Visit www.timbertech.com/installation to view TimberTech installation videos. Consult your local building codes for gate requirements The RadianceRail Gate Kit is a convenient way to add a premium gate to your railing system. Important Information Components Needed For Installing One RadianceRail Gate with the RadianceRail Gate Kit •...
- Page 2 Installing a Gate • Consult your local building codes for gate requirements. Prepare Railing Gate opening minus 4-3/4” • Measure the distance between the posts near the top and bottom of the posts. As long as both posts are plumb, this should be the same distance.
- Page 3 Installing a Gate: Continued Attach Hinges to Aluminum Side Rails gate opening, determine the desired hinge location. Hinges can be placed either in the open position when the gate is closed or in the closed position when the gate is closed (typical for a door). Hinge •...
- Page 4 If TimberTech determines that Purchaser’s claim is valid, TimberTech will, at its option, either replace the defective part or refund the portion of the purchase price paid by Purchaser for such defective part (not including the cost of its initial installation). This warranty shall not cover, and TimberTech shall not be responsible for, costs and expenses incurred with respect to the removal of any defective RadianceRail™...
Need help?
Do you have a question about the RadianceRail and is the answer not in the manual?
Questions and answers