epiphan video LUMiO 12x Quick Reference

For the complete user manual for your LUMiO 12x,
please visit epiphan.com/support

Setting up your LUMiO 12x

1. Plug in the power cable for your camera.
2. Connect your camera to a capture appliance such as
Epiphan Pearl, via HDMI™, DVI or SDI cable (cables not
provided).
3. Pair your remote control to your LUMiO 12x:
Using "CAM1" as an example: Point the remote control at your LUMiO
12x, press and hold the SET1 button on the remote control until the
indicator light on the LUMiO 12x flashes red, then press the CAM1
button; the LUMiO 12x is now mapped to the CAM1 button.

Controlling your LUMiO 12x

FOCUS (+ and – buttons on the left):
increase or decrease the focus distance. Manual focus must
be enabled (see "Switching between auto and manual focus"
section of this guide).
ZOOM (+ and – buttons on the right):
increase or decrease the zoom.
Pan (left/right arrows):
LUMiO 12x's lens left or right.
Tilt (up/down arrows):
LUMiO 12x's lens up or down.
Return to default (OK button):
LUMiO 12x's lens to its default position (pan, tilt and
zoom settings are reset).
Press and hold to
Press and hold to
Press and hold to move your
Press and hold to move your
Press to return your
QUICK REFERENCE
LUMiO 12x™
UG111-01