Shanghai Jiashen Technology Co.,Ltd.
Go into settings mode:
1, Turn on the machine, press the button for 5 seconds, enter the
main menu, as shown in Figure P 2.
2, The main menu has 5 sub menus:1--,2--,3--,4--,5--。
3, Press the button , and the 5 submenu loops.
4, Each function of the 5 sub menu:
1- -: Select lithium battery or lead acid Battery or
2- -: Setting Delay Time Delay OFF/ON,and select Delay Time
3- -: The voltage of percentage 0 to 100 could be customed.
4- -: Buzzer switch and alarm value setting.11.5V-40V.
5- -: Calibrate the instrument voltage again.
5,Click the button , select the menu to enter, and hold the button
6,All parameters must be saved at the last time.
Detailed Submenu function
1- -:
Quick change battery type
Under this menu, you can change the default parameters quickly,The L represents the lithium battery, and the
latter figure is the series quantity of the lithium battery, P stands for lead-acid batteries, and the numbers behind
represent voltage.
Set
step:Enter the menu 1--, as shown in P 3, and display 1—L/P/F xx, Click the button
F, P, and L. Press the button
specifications.After selection, press the button
parameters, hold the button
For example
:L3 represents 3 string lithium
L4 represents 4 string lithium
F4 represents 4 string
F8 represents 8 string
P12V stands for lead-acid 12V batteries
P24V stands for lead-acid 24V batteries
Note: If you choose the battery specifications and the actual battery
specifications are different, The percentage value cannot be
used as a reference value for the remaining battery power.
the voltage value is the current battery voltage.
All parameters must be saved at the last time.
Shanghai Jiashen Technology Co.,Ltd.
:
to change the parameters, select the appropriate battery
for a little long time to quit.
4.2V*3S=12.6V
4.2V*4S=16.8V
3.2V*4S=12.8V
LiFeCoPO4
3.2V*8S=25.6V
LiFeCoPO4
2017-2017COPYRIGHT
P 2
Battery
LiFeCoPO4
for a little long time to quit.
to save it. If you don't need to change other
P 3
JS-C33
to switch between