EZ-ON 100SM Installation Instructions

EZ-ON PRODUCTS
100SM/100SNY
SEAT MOUNT/HIGH BACK SEAT MOUNT

IMPORTANT INFO

• Meets FMVSS213.
• Use Only with EZ-ON Vests Compatible Vest include: 103Z, 203PB, 303Z, 403PB.
• Use on school bus seats that have entry between the seat bottom and the seat back.
• Passengers seated behind occupants with Seat Mount must be wearing a seatbelt,
a transportation vest, or must be unoccupied.
• Register this Seat Mount to be notified of a safety recall.

WARRANTY

EZ-ON Products stands behind the products we make. Warranty covers any defects in material or workmanships under
normal use during the warranty period. We will repair or replace product defects for 1 year from manufacturer date.

WARNING

Death or serious injury can occur If manufacturer's instructions are not followed correctly.
All EZ-ON products are dynamically tested to meet NHTSA standards. Please follow washing
instructions on product tag. Replace product if it is damaged, frayed, or has been in a crash.
Recommended replacement after six years.
EZ-ON Products are not liable for injury if these recommendations are not followed.
When evacuating the passenger in a safety vest, the vest webbing is never cut. One cut of the portable
seat mount webbing below the buckle will allow the passenger to evacuate the bus wearing the safety vest.
EMERGENCY CUTTING
100 SCBC
EZ-ON Safe Cut Belt Cutter
FOR SCHOOL BUS USE ONLY

EMERGENCY RELEASE PROCEDURE

1-800-323-6598
www.ezonpro.com