1. Manuals
  2. Brands
  3. Niessen Manuals
  4. Home Automation
  5. domosolutions PLANNER
  6. User manual

Niessen domosolutions PLANNER User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

USER'S MANUAL

Advertisement

Table of Contents
loading

Summary of Contents for Niessen domosolutions PLANNER

  • Page 1 USER’S MANUAL...

  • Page 3: Table Of Contents

    INDEX 1. WHAT IS PLANNER? 2. RECOMMENDATIONS BEFORE USING PLANNER 3. STANDARD 4. GUARANTEE 5. PENCIL 6. MICROSD CARD 7. TELEPHONE OPERATION (GSM) 7.1. PLANNER answers the call 7.2. PLANNER calls 8. RECOGNITION OF THE NAVIGATING ENVIRONMENT 9. START MENU 9.1.
  • Page 4 9.6.5. Automation Functions 9.6.6. Settings 9.6.6.1. Screen background 9.6.6.2. Screen Settings 9.6.6.3. Date and Time 9.6.6.4. Screen Calibration 9.6.6.5. Tones 9.6.6.6. Installer’s data 9.6.6.7. Installer’s area 9.6.7. Security Centre 9.6.7.1. Assistance Alarm 9.6.7.2. Intrusion Alarm 9.6.7.2.1. Intrusion Alarm control from the telephone (GSM) 9.6.7.3.

  • Page 5: What Is Planner

    It is possible to interact with PLANNER in two ways: LOCAL COMMUNICATION Through a tactile screen REMOTE COMMUNICATION Through the IR NIESSEN remote control, from an electronic mechanism, RF NIESSEN push button or from any other telephone.

  • Page 6: Recommendations Before Using Planner

    2. RECOMMENDATIONS BEFORE USING PLANNER PLANNER is a product of high > Avoid direct sun rays, proximity technological services and should be to television, lamps, chimneys, treated with care. heating pipes and any element producing heat. The suggestions included below will >...

  • Page 7: Guarantee

    4. GUARANTEE All devices manufactured or distributed The present guarantee will be applied by Asea Brown Boveri S.A. NIESSEN to those articles justifying a manufacture Plant are made according to the most deficiency. Therefore, it will not be applied modern technology.

  • Page 8: Microsd Card

    6. MICROSD CARD PLANNER reads and writes microSD To insert or extract the memory, use the memory cards. (Not included). It has pencil at the back side. a slot to introduce a card of microSD memory. EXTRACTION INSERTION Do not assembly or disassembly the frame with the microSD card inserted in the slot as it can cause break to the card.

  • Page 9: Telephone Operation (Gsm)

    7. TELEPHONE (GSM) OPERATION PLANNER offers the possibility of phone as well as the notifications to give answering telephone calls to inform to the user when an alarm is produced. and give the possibility of activating or It can also personalize the functions deactivating configured functions.

  • Page 10: Planner Answers The Call

    7.1. PLANNER answers the call When PLANNER is contacted, it the third attempt, PLANNER tells you to answers: call again. <Hello, this is PLANNER, please When PLANNER gives the selection introduce your 4 digits PIN> options and another option is pressed or there is no press at all, it repeats the In case an incorrect PIN (Personal proposed selection, up to 3 times, after...

  • Page 11: Recognition Of The Navigating Environment

    8. RECOGNITION OF THE NAVIGATING ENVIRONMENT PLANNER has a tactile screen through which it accedes to all the functions offered. Alarm clock and countdown function Screen blocking Temperature measuring Status bar Time and calendar Favorites Functions area Alarm clock and countdown function Allows activating an alarm or countdown of a notification clock, which emits an acoustic signal at the...
  • Page 12 Screen blocking Status bar This function allows blocking the Shows the state of the most important screen, as a protection for those cases PLANNER functions: where we want to avoid pressing on it accidentally. GSM network coverage, Intrusion Alarm, Technical Alarm and Thermostat. White colour icon: the function is disabled.
  • Page 13 Indicates the Intrusion Alarm It also shows the following operation state modes: Grey colour icon: Not connected Comfort, Night, Standby, Protection or Disconnected. Blue colour icon: Connected Red colour icon: Connected, Comfort activated detecting intrusion Night activated Indicates the Technical Alarms Stand-by activated state Protection activated...
  • Page 14 The icons shown above with a timer Favourites clock indicate the thermostat operation in a programmed mode: When pressing this icon, it accedes to the 6 functions of Home preselected by the user. Comfort programmed activated (See chapter 9.1.4 Favourites) Night programmed activated Stand-by programmed activated Protection programmed activated...

  • Page 15: Start Menu

    9. START MENU To select a function in the menu START, press on the desired icon. To turn back, press placed in the top part of the screen. To turn back to the start screen, press placed in the top part of the screen.

  • Page 16: Lighting

    9.1.1. Lighting With PLANNER you can connect, disconnect, temporize and regulate lighting. Select the lighting push button you want to activate. SWITCH TYPE BUTTON Press ON if you want to turn on the light, press OFF if you want to turn it off. DIMMER TYPE BUTTON Press “+”...

  • Page 17: Shutters

    9.1.2. Shutters PLANNER allows the shutters activating. There are two ways of activating the shutters: Select the push button SHUTTERS. > Long pressing: the shutter moves up or down during the period of time the push button is being pressed. >...

  • Page 18: Favorites

    9.1.4. Favourites Favourites is accessible from the start page. Press to accede quickly to the most used lighting, shutters or scene ed lightin functions. In the different menus of Home the icon is shown, which allows incorporating or eliminating a lighting or scene function ing a ligh from the list of favourites.

  • Page 19: Home Control From The Telephone (Gsm)

    Select the position of each function in the Favourites list. Press to close the Favourites list. If it is desired to eliminate the function from the Favourites List, press again the position in the list. If it is desired to modify the position of this function in the list, press on the new position.

  • Page 20: Messages

    Press 1, 2 or 3 to select the function of or <The function is disconnected> Home that you desire to connect. > If it to activate blinds: > If it is a switch, dimmer or a scene, <Press 1 to move up or press 0 to move <Press 1 to connect or press 0 to down…>...
  • Page 21 > To write a text message Press and the following fields will be shown in the screen: own in the > Date and time of edition of the message. >From: to edit the text of the person who sends the message. who send >To: to edit the text of the...

  • Page 22: Intrusion Control

    > > > > To read a message When pressing a message with content, text or graph, it will show the message content. Press to delete the message content. Press to show the message content in the screen saver. t in the sc 9.3.

  • Page 23: Assistance Call

    9.5. ASSISTANCE Call This Assistance call is shown in the The activation of the Assistance Alarm START page and allows activating the activates the acoustic alarm of PLANNER, Assistance Alarm. calls to the list of telephones assigned to this alarm and activates the automatisms By pressing this push button during configured with this incidence.

  • Page 24: Timer Programs

    9.6.1. Timer Programs PLANNER offers up to 4 preconfigured Timer Programs where programming schedules can be modified. To activate or deactivate the timer It is possible to determine up to two program, press on ON/OFF. time zones for each day of the week, where is defined for each one: hour of To modify the program activation hours START and hour of END.

  • Page 25: Thermostat (Climate Management)

    When pressing on determines the START state RT state and the END state values corresponding to the lighting and/or shutters functions that compose the timer program. Use the option when it is desired to copy this day d to copy this day configuration to another day of the week.
  • Page 26 9.6.2.1. MANUAL MODE Climate management The screen will show 5 manual mode operations (according to the configuration realized by the installer) and one program mode operation (see chapter 9.6.2.2. PROGRAM MODE Climate management): PLANNER has two operation modes: > Summer, when has a cool >Winter, when has a heating installation (air conditioning).
  • Page 27 > Disconnection In summer, this function maintains the Temperature of the house below the It disconnects the Climate system he Climate sy reference Temperature. completely. To connect it press the desired option. In winter, this function maintains the Temperature of the house over the When it is disconnected it appears in sconnect reference Temperature.

  • Page 28: Manual Mode Climate Management

    > Anti-freeze and to reach a minimal temperature overheat protection established by the system. > In summer to prevent that in the The aim of this operation mode is: house excessive high temperatures is > In winter to prevent from reached.
  • Page 29 Select the mode and times during which it will be activated. It is possible to select several different modes throughout the day. To finish, select To copy the configuration to other days, select Determine the days where it is desired When activating the Program Mode, to copy the programming.

  • Page 30: Thermostat Control From The Telephone (Gsm)

    9.6.2.3. Thermostat Control from the telephone (GSM) PLANNER informs and allows you to <Your thermostat is controlling… control all the thermostat options by … cool (Mode SUMMER) telephone (GSM). … heat (Mode WINTER) <The current operation is … After introducing the PIN, PLANNER …...

  • Page 31: Screen Saver

    9.6.3. Screen saver The screen saver of PLANNER is activated after 3 minutes if no action is done on the screen. To use PLANNER, touch on the tactile screen. It is possible to configure the screen saver of PLANNER in three different ways: >As photo frame >Personalized >Energy saving (Off)

  • Page 32: Sensors Information

    > Personalized Screen saver PLANNER allows configuring a personalized screen saver where it can be defined what it is desired to appear in screen, for example an image contained in the microSD card, the time, the date, the temperature and/or a text. >...

  • Page 33: Automation Functions

    The state of the four possible binary depending whether each of these sensors sensors show in general “0” or “1”, are deactivated or activated. This visualization sensors state page will display the information provided and configured by the installer 9.6.5. Automation Functions PLANNER shows the state, activated or deactivated, of the programmed Automation Functions.

  • Page 34: Screen Settings

    9.6.6.1. Screen background Allows selecting the screen background. 9.6.6.2. Screen settings Allows setting the screen brightness. Once set the desired values, press OK to confirm. 9.6.6.3. Date and Time Allows setting the date and time of PLANNER. The minute, hour, day, month and year values will be modified with the arrows.

  • Page 35: Screen Calibration

    9.6.6.4. Screen Calibration It is possible that, as time pass, in the screen does not exactly coincide the pressing area with the activated area. To correct this small error is recommended to calibrate the screen. The calibration should be done pressing on the 4 points shown in the screen.

  • Page 36: Installer's Data

    9.6.6.6. Installer’s data This screen shows the installer’s or the ’ company in charge of maintenance data of PLANNER. 9.6.6.7. Installer’s Area Before modifying any function’s configuration it is important to have a backup made on a microSD card. (Consult in the Installation Manual: START PAGE / Menu / Settings / Installer’s area / Projects / Keep current project of PLANNER in the microSD card) To configure PLANNER it is necessary the installer’s PIN.

  • Page 37: Assistance Alarm

    9.6.7.1. Assistance Alarm From this page it is possible to connect or disconnect the assistance alarm. PLANNER shows the state of the assistance alarm: > Disconnected: in the main page the assistance push button is not shown. >Connected: In the main page the assistance push button is shown.

  • Page 38: Intrusion Alarm Control From The Telephone (Gsm)

    PLANNER allows establishing a courtesy time (established by the installer) for the connection and disconnection of the intrusion alarm. This allows acceding to PLANNER to deactivate the alarm when arriving to the house, as well as to connect the alarm and exit the house without the alarm being activated.

  • Page 39: Technical Alarms

    9.6.7.3. Technical Alarms PLANNER allows visualizing, besides connecting and disconnecting them, the active Technical Alarms for the incidence surveillance as the water, gas leakages, smoke and fire. This page shows the state of each of the different technical alarms, being these able to be: (b) The intrusion alarm icon in the status >...

  • Page 40: Mains Fault

    9.6.7.4. Mains fault It is possible to connect or disconnect the notification alarm surveillance state when there is lack of electric power supply. If a Mains fault is produced or when the electric supply voltage is restored, PLANNER makes a round call to all the pre-established telephones.

  • Page 41: Telephones

    9.6.7.5. Telephones From this page it is possible to assign ibl t 5 telephone numbers to each one of the different PLANNER alarms (intrusion alarm, technical alarms, assistance alarm and Mains fault) to which PLANNER calls when there is an incident and makes the round notification calls.

  • Page 42: Passwords

    PLANNER makes one call to check if the configured telephone is correct. To delete the telephone number, select the desired number and press 9.6.7.6. Passwords PLANNER is protected to avoid the system configuration changes by non authorized people (Installer’s Area) and to protect the alarms management (Security Centre) by means of a unique Password, PIN.

  • Page 43: Voice Messages

    9.6.7.7. Voice messages PLANNER has two pre-recorded messages (by default) which are used in its navigation menu when communicates by phone, to refer to the most important functions. It is possible to personalize them with the user’s voice. > To record, press , talk loud and clear to PLANNER.

  • Page 44: Gsm Unit Configuration

    > Incidence notification of intrusion 9.6.7.8. GSM Unit configuration alarm or technical alarms When PLANNER notifies by phone an From this page is possible to activate the GSM communication unit of intrusion detected in some of the areas of detection, it refers to each of them PLANNER.

  • Page 45: Security Centre Control From The Telephone (Gsm)

    9.6.7.9. Control Security Centre 9.6.7.9.1. Check the alarms state from the telephone (GSM) When pressing “0”, PLANNER informs of the alarms state. Call PLANNER and introduce the PIN. The description made by PLANNER of PLANNER answers: the house alarms state is the following: <Hello, this is PLANNER, please, introduce your 4 digits PIN>...
  • Page 46 <The alarm “technical four”… > Assistance call … it is connected and has detected> PLANNER informs: … it is connected and it has not <The assistance alarm is connected… detected> …and has detected an intrusion.> <the alarm “technical four” is …and has not detected an disconnected.>...

  • Page 47: Energy Meter

    9.6.8. Energy meter PLANNER shows information of the Energy meter (kWh) and the partial and accumulated cost ( ). These counters are resettable, allowing to control the consumption from the moment you desire. The kWh cost can be defined in cent units /kWh and accede to a week or annual basis consumption graph.

  • Page 48: Annual Energy Meter Information

    9.6.8.2. Annual Energy meter Information Shows a graph of the annual Energy meter: >The upper limit of the Y axle is defined by the Energy meter value corresponding to the day of the week of more consumption. The consumption of the rest of the days of the week is shown concerning this maximum value.

  • Page 49: Alarms Notification

    10. 10. ALARMS NOTIFICATION 10.1. Notification of Intrusion detection If somebody from outside attempts to somebody from outside attempts to Intrusion Alert, the acoustic signal of rusion Alert the acoustic signal of accede your house, PLANNER detects PLANNER can be disconnected, stop the the intrusion and notifies as follows: phone calls round, and disconnect the >...

  • Page 50: Notification For Technical Alarms

    10.2. Notification for Technical Alarms If any Technical Alarm is activated, From the house, after confirming the PLANNER detects it and notifies as alarm, through the security Centre in follows: Technical Alerts, the acoustic signal of PLANNER can be disconnected, stop the >...

  • Page 51: Notification From The Assistance Call

    10.3. Notification from the Assistance Call When a person activates the Assistance From the house, after confirming the Call from the start screen of PLANNER, it alarm, through the security Centre in automatically notifies as follows: Assistance Alarm, the acoustic signal of >...

  • Page 52: Notification For Mains Fault

    10.4. Notification for Mains fault If a Mains fault occurs or when the the Mains fault and later electric supply electric supply voltage is restored, voltage restoration. PLANNER will made the telephone calls > Makes the telephone calls round round pre-established. assigned until the notification is confirmed by any of them.

  • Page 53: Technical Features

    Sensibility -40dB, S/N 58dB Amplifier 8W, 2W, 400-20.000Hz OPTIONAL UNITS AND OTHERS CONNECTION Conector de 18 pines para conexión de módulo GSM Niessen: Connector for GSM Niessen unit Módulo GSM-850, E-GSM-900, DCS-1800, PCS-1900 Soporte de antena en marco. Connector for GSM Niessen unit...
  • Page 54 data User’s PIN: Phone Number ( SIM card): SIM card PIN: SIM card PUK: PLANNER Installation date: Installer Details Name: Company: Phone: E-mail: Company stamp Notes:...
  • Page 55 Asea Brown Boveri, S. A. NIESSEN FACTORY Pol. Ind. Aranguren, 6 20180 Oiartzun - Spain Tel.: +34 943 260 101 Fax: +34 943 260 250...

Table of Contents